Does turning down radiators preserve the heat in the water?
Hi all,
Sometimes - for no reason I can find - the rooms get uncomfortably warm, even though theres no change in outside temperature. My question is: If I turn down the radiator in the room Im currently in, will that preserve the heat in the water so it doesnt have to be heated os much when it goes round the house again? So - in effect - I havnt wasted any energy by turning the radiator down?
Thanks
In my opinion, the water that doesn’t flow through the radiator but wends its’ way along the flow, will be losing a small amount of energy from the surface of the pipework and the rest will be available to the flow input of the next emitter in the line.
One facet of balancing radiators is that when one emitter has its’ flow restricted, this makes more of the energy available to the next emitter and, as a result, more than one round of emitter tweaking is required via the lockshield valves.
As to whether you have ‘wasted’ any heat or energy, most internal pipes within the heated envelope of the house will be emitting some heat and being uninsulated, this contributes towards the overall heating. The emitters will (or should) be ensuring that the energy radiates or convects mainly from them but the pipework will contribute (or leak!) some energy - hopefully in useful areas. The return pipe run water will still have energy and the higher the temperature of this return flow, the less energy will be needed to return it to the desired flow temperature.
The Delta T (often designed to be 5 degrees C) is usually controlled by the heat pump adjusting flow speed and heat pump energy output, so the less energy that is needed, the lower the output needs to be from the pump; lowering flow temperature normally improves efficiency and reflects better COP figures. That’s my pennorth anyway! Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
South facing rooms with large windows can experience high solar gain. Is this the case? Solar gain is one factor that external weather compensated control cannot compensate for. Even in winter, the energy from the sun striking even double glazed windows can transmit high radiant heat energy into the room. Most ASHPs use an external air temperature sensor and control software to regulate heating supply temperature according to outdoor air temperature. If not solar gain, then it could be your heat emitters into the rooms prone to overheating need rebalancing to provide a little less output.
Some systems control heating capacity using indoor room temperature sensing, which is a slightly different method called load compensation, it's quite rare however as a control method, and is better suited to large open plan living single zone open spaces rather than traditional UK homes with multiple rooms.
For rooms with radiators that do get a little warm due to solar gain, TRVs can help, by setting them to a slightly higher temperature than you normally want to room to be, just to prevent it overheating.
- 26 Forums
- 2,112 Topics
- 46.4 K Posts
- 73 Online
- 3,408 Members
Join Us!
Latest Posts
-
RE: No-code, plug-and-play monitoring for your heat pump
I think I have found “The One!” Waveshare ESP32-S3-POE-...
By Grantmethestrength , 11 hours ago
-
RE: Buffers, hot water and cooling
@prunus, @jamespa is correct, but removing the buffer ...
By Brendon Uys , 16 hours ago
-
@downfield and @toddles, this isn’t in the settings cur...
By Mars , 1 day ago
-
RE: Homely launched for Grant Aerona ASHP control
I haven't bought the Aerona Smart Controller (£700!) bu...
By Prunus , 2 days ago
-
RE: Antifreeze top up for my heat pump - is this a rip off?
For the record, Grant supply ethylene glycol for their ...
By Prunus , 2 days ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
@skyefarmer amazing. Well done!
By Mars , 2 days ago
-
RE: Wood burner with ASHP - direct air?
@sune is ideal to answer this, but I think he's on vaca...
By Mars , 3 days ago
-
RE: Say hello and introduce yourself
Hi @topher - you might be interested to see this very r...
By Transparent , 3 days ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Ebac 5kw - Monobloc R32. Developed and made in UK - Mit...
By marcinwloch69@gmail.com , 4 days ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Just another thought - it might be worth thinking about...
By JamesPa , 4 days ago
-
RE: BUS Grant: removal of all other fossil fuel heat sources
@rikiarn - just have a think as to how much it will cos...
By Transparent , 4 days ago
-
Don't do much digging around.That's best left to the pr...
By Transparent , 4 days ago
-
Hi all, I was wondering if anyone had an idea of how th...
By Wh0am3ye , 5 days ago
-
RE: EBAC re-entering the ASHP market in 2023
@toodles confirm i have Ebac 5kw ASAP + homely and it w...
By marcinwloch69@gmail.com , 5 days ago
-
RE: Compute heat loss from energy used
@jamespa Ebac must be similar to Mitsubishi as they buy...
By marcinwloch69@gmail.com , 5 days ago
-
@pie_eater I have been thinking of adding cooling to my...
By TechnoGeek , 7 days ago
-
RE: Victorian Semi Retrofit / Extension ASHP and UFH Advice
Agree, but you may have a hard time convincing them, as...
By JamesPa , 1 week ago
-
RE: Seal the Deal: Don't Let Your Heat Pump Leak Energy
Hi - fyi - there's a dead image link in the 'Optimal In...
By seatonian , 1 week ago
-
RE: Ripped Off: How UK Homeowners Are Paying Gas Prices for Wind Energy
@chandykris Horses and beggars…. 😉 Toodles.
By Toodles , 1 week ago
-
RE: Cleaning up after gas meter removed
@agentgeorge Likewise in the loft space; we have 300mm ...
By Toodles , 1 week ago