Notifications

Clear all

Samsung heat pump has arrived with damaged fins – do I accept it or send it back?

Air Source Heat Pumps (ASHPs)

Last Post by AllyFish 8 months ago

6 Posts

5 Users

5 Reactions

756 Views

RSS

AdamC001

(@adamc001)

Active Member Member

Joined: 8 months ago

Posts: 2

Topic starter 11/12/2024 2:30 pm

Hello everyone,

I have just had this Samsung heat pump delivered. It has been hit on the fins. Will it be ok or should I reject it?

This topic was modified 8 months ago by AdamC001

This topic was modified 8 months ago by Mars

Quote

Majordennisbloodnok

(@majordennisbloodnok)

Famed Member Moderator

Joined: 4 years ago

Posts: 893

11/12/2024 4:43 pm

I'm only a layman but I'd personally reject it given there's no way of knowing for sure what other consequences there may have been to the impact that caused the damage you can see.

105 m2 bungalow in South East England
Mitsubishi Ecodan 8.5 kW air source heat pump
18 x 360W solar panels
1 x 6 kW GroWatt battery and SPH5000 inverter
1 x Myenergi Zappi
1 x VW ID3
Raised beds for home-grown veg and chickens for eggs

"Semper in excretia; sumus solum profundum variat"

👍

ReplyQuote

Mars

(@editor)

Illustrious Member Admin

Joined: 5 years ago

Posts: 3385

11/12/2024 4:49 pm

I completely agree with @majordennisbloodnok – I’d send it back. While a few bent fins are common and often dismissed as insignificant by installers and manufacturers, the dent in your photos looks more substantial. Some installers have "combs" that they use to straighten them, but why take the risk? It’ll be interesting to hear what your installers have to say if you decide to return it.

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast

ReplyQuote

ASHP-BOBBA

(@ashp-bobba)

Honorable Member Member

Joined: 8 months ago

Posts: 204

11/12/2024 4:58 pm

did it arrive like that as I can see banding around it or was it in a box and someone has un-packet it and discovered the coil fin damage?

Professional installer. Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.

👍

ReplyQuote

AdamC001

(@adamc001)

Active Member Member

Joined: 8 months ago

Posts: 2

Topic starter 11/12/2024 6:27 pm

Hi guys thanks for the replies.

So it seems when they tried to hoist it up the scaffolding it must have hit something.

I was not home but will be tomorrow, so will talk to the installers and see what they say.

Will keep you posted!

👍

ReplyQuote

AllyFish

(@allyfish)

Noble Member Contributor

Joined: 3 years ago

Posts: 493

12/12/2024 12:17 pm

Damage is cosmetic is appears, but the result of poor handling, so there could be inner damage unseen. Send it back. I've noticed an increasing trend for ASHP OEMs not to have any protective guards on the coil inlet face. Removable guards used to be standard, but I guess its added cost for the manufacturer.

👍

ReplyQuote