ASHP Cut-off Temperatures: What's Your Setting and is a Your Heating Still On?
My system has been running 24/7 on weather compensation from last September until today when I fitted a thermostat.
I did think about just changing the weather comp curve to 20@20, but then the pump would still run.
My wife still has the heating on as of this evening, she wanted it at 24 in the lounge. I tweaked the low temperature end of the curve up from 35 to 37.5 to make the rads feel warm when she turns the stat up.
Off grid on the isle of purbeck
2.4kW solar, 15kWh Seplos Mason, Outback power systems 3kW inverter/charger, solid fuel heating with air/air for shoulder months, 10 acres of heathland/woods.
My wife’s house: 1946 3 bed end of terrace in Somerset, ASHP with rads + UFH, triple glazed, retrofit IWI in troublesome rooms, small rear extension.
I imagine that for those of you with “automated” systems, your heat pumps must have kicked in this week with the chill in the air.
For the rest of us with more basic, older controls (like mine), when do you plan on switching your heat pumps on for heating? Or did you give in to the colder temperatures these past few days?
Pre-order: The Ultimate Guide to Heat Pumps
Subscribe and follow our Homeowners’ Q&A heat pump podcast
This year it been rubbish weather in Scotland, think we missed out on summer, it was too wet to get warm. Last year it was October before the heat went on, this year beginning of September - global warming doing it's thing - making Scotland colder! But it's let me fiddle with settings and PV pays for any mistakes and any higher electricity consumption.
@editor as my smart thermostat system is "on" all the time I guess you could class it as automated and yes it has kicked in in early mornings and a little at night this week.
In the wilds of Cambridgeshire we have had a couple of 3 - 5 degree nights but the temperatures this year have been frequently under par since the start of La Nina
5 Bedroom House in Cambridgeshire, double glazing, 300mm loft insulation and cavity wall insulation
Design temperature 21C @ OAT -2C = 10.2Kw heat loss
Bivalent system containing:
12Kw Samsung High Temperature Quiet (Gen 6) heat pump
26Kw Grant Blue Flame Oil Boiler
All controlled with Honeywell Home smart thermostat
If heating shuts off for the summer but is still needed to heat hot water is that economical or expensive due to heating from cold?
@suzy-shadow Hi, Domestic hot water production is generally less efficient in itself. For example my combined heating and hot water efficiency is on average 4.3 COP. Hot water only production over the summer has been a COP of 3.6.
Is it more or less expensive? That is a difficult question to answer as it depends on tariff prices, hot water tank efficencies etc. In my case I find it cheaper to heat my 200 litre tank to 55 Celsius and take a hit on my COP value which all happens during a cheap electricity period in the night. This tank full in most cases lasts all day and costs on average 17p per day. If I made the COP value better by reducing the tank temperature then the hot water would possibly need 2 heating cycles in a day, 1 in the morning and another in the afternoon due to hot water running low, costing approximately 40p to 50p a day if that makes sense
Hopefully that helps answer your question
5 Bedroom House in Cambridgeshire, double glazing, 300mm loft insulation and cavity wall insulation
Design temperature 21C @ OAT -2C = 10.2Kw heat loss
Bivalent system containing:
12Kw Samsung High Temperature Quiet (Gen 6) heat pump
26Kw Grant Blue Flame Oil Boiler
All controlled with Honeywell Home smart thermostat
- 26 Forums
- 2,171 Topics
- 47.8 K Posts
- 40 Online
- 5,744 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Big Changes Coming to Our Heat Pump System
@editor your engineer's attitude is truly horrifying. ...
By GrahamF , 15 hours ago
-
@cliffhanger - seriously though, I have no idea. What I...
By cathodeRay , 17 hours ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 17 hours ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 18 hours ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 22 hours ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 1 day ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
I've never physically seen it, but I seem to recall som...
By cathodeRay , 1 day ago
-
@jamespa Ours is a Daikin EDLA03 8 kW and the Delta T =...
By Toodles , 1 day ago
-
RE: Midea ASHP – how to set weather compensation
I noticed that too and thought the same thing, but then...
By cathodeRay , 2 days ago
-
RE: Ya can’t win! It is S*d’s Law!
@old_scientist If IOF is still running next late spring...
By Toodles , 2 days ago
-
RE: Electricity price predictions
Those of you on Agile will do well tomorrow; there are ...
By Toodles , 2 days ago
-
RE: Who’s Caved and Switched the Heating On Already?
We've been running our Ecodan system, installed in June...
By Sheriff Fatman , 2 days ago
-
Ok. Two schools of thought. The first is to run the ...
By JamesPa , 3 days ago
-
@drei Willing as I am to help, I don't think I'm yet ...
By JamesPa , 3 days ago
-
Selling 5 year old ASHP & Gas Combi Boiler - £590
Selling a 5-year-old Daikin Altherma Hybrid Air Source ...
By Paul G , 3 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Er true, it should have read l/hr!
By JamesPa , 3 days ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 5 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@dgclimatecontrol I attach the responses from 2 potenti...
By pash44pump , 5 days ago
-
RE: Buffers, hot water and cooling
@dgclimatecontrol thanks, that's helpful.
By JamesPa , 6 days ago