Recent Posts

| Forums | Topics

Page 101 / 168 Prev Next

Posts with their shortened content
	RE: Mixergy Tank Failure By JamesPa, 3 weeks ago Forum Domestic Hot Water & Cylinders
	Crazy if that is the case. It will surely be the norm if you try to top up a partially heated cylinder in summer when the ft will start out cold compared with the cylinder temp.
	RE: Mixergy Tank Failure By Old_Scientist, 3 weeks ago Forum Domestic Hot Water & Cylinders
	Agreed. Definitely not the cylinder temp, as the DHW cycle would not start if the cylinder was already at temp (or within hysteresis), and certainly would not cause it to end so quickly. Assuming you...
	RE: New Fogstar 15.5kWh upright solution By GGW, 3 weeks ago Forum Energy Storage
	It's is a PACE BMS. 15% just seems to be a little high, I would run it to at least 10% if I could. But ain't cared enough to prioritise figuring it out. PBMS would likely tell me. If I disconnect the...
	RE: Options on flushing my system By SUNandAIR, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@grantmethestrength with your pragmatic approach and 👀 knowledge on hand I’m sure it will be a positive outcome. Don’t hesitate to ask if any questions crop up along the way. Best of luck ...
	RE: Options on flushing my system By Grantmethestrength, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@sunandair it is a case of necessity as soon as you mention you have an ASHP most local plumbers run a mile and being rural that means no plumbers for Simon! I have pretty much labelled up all the pip...
	RE: New Fogstar 15.5kWh upright solution By Transparent, 3 weeks ago Forum Energy Storage
	Well the BMS on its own can't initiate a Charge from Grid.It requires the Sunsynk inverter to handle the matter. What happens if you simply disconnect the data cable (CAN or RS485) which links BMS and...
	RE: Samsung Heat Pump – Can't Activate TW2 Pipe Sensor (for Delta T Control) By bubuontheweb, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@batpred For the moment I'm sticking with what I have, as the proved to be reliable. I'll add an update once some time passes.
	RE: Mixergy Tank Failure By bontwoody, 3 weeks ago Forum Domestic Hot Water & Cylinders
	@jamespa Not the Samsung but I have openenergy monitor so I can see flow rate and flow and return temperatures. The cylinder temp is on the Samsung controller and way below the required temperature so...
	RE: Mixergy Tank Failure By JamesPa, 3 weeks ago Forum Domestic Hot Water & Cylinders
	Agreed Does Samsung have any kind of 'stream of consciousness' real time monitoring telling you what it's currently doing? My Vaillant does and my installer used it to confirm his suspicions of a bl...
	RE: Mixergy Tank Failure By bontwoody, 3 weeks ago Forum Domestic Hot Water & Cylinders
	@jamespa logically if the Samsung is turning things off it only has four inputs. The cylinder temperature, flow and return temperatures and flow rate. Unless I've missed something?
	RE: Help me keep the faith with my air source heat pump installation By AdamK, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa ive found out today the Thermix plinth heaters have an adjustable flow temp all the way down to 25c, which is adjustable via the wireless stat which controls both plinth heaters. will have a ...