Recent Posts

| Forums | Topics

Page 156 / 173 Prev Next

Posts with their shortened content
	RE: Daikin 9kW to 8kW Swap Offer from Octopus By Matban, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@terry1812 Thank you for your reply. Yes a 6 would probably be fine. I haven't checked the actual output vs temp chart for it. But with the 6 and 8 having the same hardware and minimum modulation t...
	RE: Inventor (Midea) Heat Pump short cycling advice By immunity, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I installed the 80L tank (volumizer) things got better but still...I installed an external circulation pump (it's 1 hydralic system tank in series) in increase the flow rate and reduce the ΔΤ probably...
	RE: Mitsubishi Ecodan F8 error By Mars, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I absolutely love this. This is the quintessential heat pump user experience. Mitsi spent millions on the vapour compression cycle, only to delegate diagnostics to a single LED trying to communicate ...
	RE: Mitsubishi Ecodan F8 error By ASHP-BOBBA, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Just to add to the F8 non existing code, in the book is all of the blinking codes and could be worth double checking it not trying to display a P8 which could look like a F8
	RE: Mitsubishi Ecodan F8 error By Majordennisbloodnok, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	It’s errormentary, my dear Wattson. Sorry, I’ll get my coat….
	RE: Mitsubishi Ecodan F8 error By ASHP-BOBBA, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@editor Pages 59-74 for all Error codes and Request codes in the attached link, F8 is not showing as I think it is a shadow code related to P9. We have a log in code for a installers portal that gives...
	RE: Mitsubishi Ecodan F8 error By Mars, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@ashp-bobba, do you have a list of Ecodan error codes? If you do, please can you send them to me so I can train Wattson them?
	RE: Mitsubishi Ecodan F8 error By HJD, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Thanks for everyone’s input. That helps me and my neighbour to do some more investigation.
	RE: Mitsubishi Ecodan F8 error By ASHP-BOBBA, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@hjd F8 is uncommon and could indicate incorrect heat exchange due to a lack of flow or a faulty sensor, if you think this is just happening when it gets colder I would suggest all the normal things y...
	RE: Testing new controls/monitoring for Midea Clone ASHP By benson, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@papahuhu at the end of the day if you are happy with homely, that is all that matters. I thought it was ok overall and certainly saves time fiddling with WCC settings. The dashboard access issue woul...
	RE: Can you recommend a Mitsubishi service engineer in the Rochdale area? By Suzy-shadow, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@dgclimatecontrol We'll all need annual servicing. However I do have a bit of gurgling on start-up as well. (radiators all getting fully hot)