Recent Posts

| Forums | Topics

Page 36 / 57 Prev Next

Posts with their shortened content
	RE: Failed install (initial SCOP1.8), clueless installer compounded by poor manufacturer support. Help needed desperately! By Bart, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@editor cheers. Given the ongoing dispute I'll email
	RE: Air Changes per Hour - ACH and the MCS requirement By ASHP-BOBBA, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa Its interesting that 10% miscalculation on design and can make such a big difference to running costs compared to the boiler days. I think we will look into air testing as a part of our devel...
	RE: Failed install (initial SCOP1.8), clueless installer compounded by poor manufacturer support. Help needed desperately! By Mars, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Will reply later in detail. Who’s the manufacturer?
	Failed install (initial SCOP1.8), clueless installer compounded by poor manufacturer support. Help needed desperately! By Bart, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Hi All, My first post. I've learned a lot from reading this forum, wanted to validate my understanding and thought others might learn from my terrible experience. Having completed a 5 month complaints...
	I don't need any heating in the summer. How do I turn my Samsung heat pump off? By QuakerQuaker, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Hi - just got ASHP installed, its a Samsung and installed by 21 degrees, replacing combi gas boiler. Feeling slightly alarmed by how technical it seems to be to properly understand and manage HP. Any...
	RE: Flow Rate & Low Loss Headers By MorganR, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa Also, check the noise spec given its going to be indoors. They say it's 56db, which is apparently similar to a modern boiler? And much lower than our tumble dryer (64db), both of which we h...
	RE: Remaining hot water/hot water flow meter By JamesPa, 2 weeks ago Forum Domestic Hot Water & Cylinders
	You could do a sensor near the top (it would need to be inside the insulation so can you get at it and how would you use it to signal you) but there is probably a solution that doesn't involve any add...
	Remaining hot water/hot water flow meter By Lakey, 2 weeks ago Forum Domestic Hot Water & Cylinders
	Our ASHP install has just completed, however we seem to be consistently running out of DHW. I know it takes some adjustment but I was hoping for advice on managing that transition. We have a 200L cyli...
	RE: Thinking of ripping our my IVT Greenline HT Plus C model and replacing with a gas boiler. By JamesPa, 2 weeks ago Forum Grounds Source Heat Pump (GSHPs)
	That's great and in principle I wouldn't disagree, but if someone is being quoted 18K to fix a heating system then I can fully understand their reluctance (and surely you can also) - that's just silly...
	RE: Thinking of ripping our my IVT Greenline HT Plus C model and replacing with a gas boiler. By Watkins247, 2 weeks ago Forum Grounds Source Heat Pump (GSHPs)
	@jamespa No good location to put ASHP would need considerable building work. Meaning cost very similiar.
	RE: Air Changes per Hour - ACH and the MCS requirement By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@ashp-bobba My personal perspective on this, based on my own experience and the sad stories I read on this forum, is that the industry as a whole (I'm emphatically not speaking about you - you obvious...