Forums

Forums
Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 105 / 164
Posts with their shortened content
RE: New Fogstar 15.5kWh upright solution  

By Batpred, 3 weeks ago

Forum Energy Storage
  😉 😉 Some folks get spare BMSs..  
Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far  

By Batpred, 3 weeks ago

Forum Energy Storage
  I ended up with a Solis S6-EH1P8K-L-PLUS (8 kW) hybrid inverter, and so thought it might be useful to share why. A hybrid inverter is basically the brain that sits between your solar panels, batteries...
RE: Mixergy Tank Failure  

By JamesPa, 3 weeks ago

Forum Domestic Hot Water & Cylinders
  Crazy if that is the case. It will surely be the norm if you try to top up a partially heated cylinder in summer when the ft will start out cold compared with the cylinder temp.
RE: Mixergy Tank Failure  

By Old_Scientist, 3 weeks ago

Forum Domestic Hot Water & Cylinders
  Agreed. Definitely not the cylinder temp, as the DHW cycle would not start if the cylinder was already at temp (or within hysteresis), and certainly would not cause it to end so quickly. Assuming you...
RE: New Fogstar 15.5kWh upright solution  

By GGW, 3 weeks ago

Forum Energy Storage
  It's is a PACE BMS. 15% just seems to be a little high, I would run it to at least 10% if I could. But ain't cared enough to prioritise figuring it out. PBMS would likely tell me. If I disconnect the...
SUNandAIR RE: Options on flushing my system  

By SUNandAIR, 3 weeks ago

Forum Air Source Heat Pumps (ASHPs)
  @grantmethestrength with your pragmatic approach and 👀 knowledge on hand I’m sure it will be a positive outcome. Don’t hesitate to ask if any questions crop up along the way. Best of luck ...
RE: Options on flushing my system  

By Grantmethestrength, 3 weeks ago

Forum Air Source Heat Pumps (ASHPs)
  @sunandair it is a case of necessity as soon as you mention you have an ASHP most local plumbers run a mile and being rural that means no plumbers for Simon! I have pretty much labelled up all the pip...
Transparent RE: New Fogstar 15.5kWh upright solution  

By Transparent, 3 weeks ago

Forum Energy Storage
  Well the BMS on its own can't initiate a Charge from Grid.It requires the Sunsynk inverter to handle the matter. What happens if you simply disconnect the data cable (CAN or RS485) which links BMS and...
RE: Samsung Heat Pump – Can't Activate TW2 Pipe Sensor (for Delta T Control)  

By bubuontheweb, 3 weeks ago

Forum Air Source Heat Pumps (ASHPs)
  @batpred For the moment I'm sticking with what I have, as the proved to be reliable. I'll add an update once some time passes.
Page 105 / 164

 

 

 

Share:

Join Us!

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →