Recent Posts

| Forums | Topics

Page 27 / 38 Prev Next

Posts with their shortened content
	RE: Surface mount or bury primaries for heat pump installation? By Aventus Eco, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@tomasmcguinness, I think your best bet would be using underground ducting. You can get pre-insulated pipe for the flow and return, plus an additional two ducts, one for the power cable and one for th...
	RE: Solar Power Output – Let’s Compare Generation Figures By Tim441, 4 weeks ago Forum Solar Photovoltaic (PV)
	@toodles all depends on asking the right questions! And I probably led you down the wrong path. Shade ToleranceMPPT on individual cell-strings optimizes energy harvest. Built-in Cell OptimizerNo addit...
	RE: Solar Power Output – Let’s Compare Generation Figures By Toodles, 4 weeks ago Forum Solar Photovoltaic (PV)
	@tim441 I asked Wattson: What is ‘intelligence’ where solar panels are concerned? “Intelligence” in the context of solar panels refers to the smart technologies and systems that optimise how...
	RE: Solar Power Output – Let’s Compare Generation Figures By Toodles, 4 weeks ago Forum Solar Photovoltaic (PV)
	@tim441 I can and do keep 12 of the 21 panels clean with a brush and rainwater; the other 9 are out of safe reach though. 😏 Toodles.
	RE: Solar Power Output – Let’s Compare Generation Figures By Tim441, 4 weeks ago Forum Solar Photovoltaic (PV)
	@toodles My old system is 2kw. S facing. Pitched roof. Solaredge optimisers. Mostly good sun with a chimney that shades 1 panel in particular in the morning. My newer system is 6kw. E facing on near ...
	RE: Solar Power Output – Let’s Compare Generation Figures By Toodles, 4 weeks ago Forum Solar Photovoltaic (PV)
	Oh, and I might add that each panel has its’ own Enphase IQ7A microinvertor. Toodles.
	RE: Solar Power Output – Let’s Compare Generation Figures By Toodles, 4 weeks ago Forum Solar Photovoltaic (PV)
	@tim441 Bearing in mind my 8.1 kWp. array is not ideally orientated and that I do have some issues with part-time shading, my production is fairly respectable I think. I have 5 panels on the house roo...
	RE: Mitsubishi cycling while on chilled water output By JamesPa, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I absolutely wouldn't remove the buffer altogether, I'd convert it to a volumiser. My suggestion above was intended to convey that sorry for not being clear. Even that is a bit too small for margin. ...
	RE: Solar Power Output – Let’s Compare Generation Figures By Tim441, 4 weeks ago Forum Solar Photovoltaic (PV)
	@toodles June figures confirm my GivEnergy app AND portal both returning incorrect data 😬😢 GIVENERGYImport 579.1Export 829.3Solar 747.75 METER readings taken early on 1st june/1st Jul...
	RE: Mitsubishi cycling while on chilled water output By downfield, 4 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa I am not in principle against removing the buffer - my main concern is system volume. The Jaga rads hold very little water - less than a litre each and so with the pipework only perhaps 20 li...