Recent Posts

| Forums | Topics

Page 95 / 167 Prev Next

Posts with their shortened content
	RE: Help me keep the faith with my air source heat pump installation By AdamK, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@grantmethestrength also i need to check the other strainer in the isolator valve, unfortunately its behind a 42mm bolt style cap so need to buy a much bigger adjustable spanner.
	RE: Samsung Holiday schedule By bontwoody, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@richdorm Im actually happy with my Samsung 🙂 but I do agree the documentation is appauling. Have you looked at the Outing function? I think Glyn Hudson used it in one of his youtube videos.
	RE: Getting ready for export By Batpred, 2 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	Agree, that is the route I also advise most to take. In my case, I contacted an installer recommended by Fogstar. After a few calls, £3200 was estimated over the phone. Fair for a simple no PV system...
	RE: Mixergy Tank Failure By bontwoody, 2 weeks ago Forum Domestic Hot Water & Cylinders
	@jamespa @old_scientist @iaack Hi, thanks for the input. So the situation is that I had a direct mixergy cylinder fitted 3 years ago but plumbed my heat pump ready so that I could add the Mixergy heat...
	RE: Say hello and introduce yourself By JamesPa, 2 weeks ago Forum Introductions, Forum Rules & Updates
	Agree with the first bit, not so sure about the second given the uncertainty over ach in particular but also fabric. I'm not sure how many houses can be expected to have their changes 'well documented...
	RE: Help me keep the faith with my air source heat pump installation By AdamK, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@grantmethestrength yes took the main magnetic strainer one out last week and cleaned it, the flow jumped from 725l/h to 1100l/h. its now at about 985l/h. trouble is with the pump being on auto im not...
	RE: Mixergy Tank Failure By IaAck, 2 weeks ago Forum Domestic Hot Water & Cylinders
	@bontwoody "but after a minute the 3 way valved closed." I might be wrong but could it be a 3 port, 2 way valve with mid-position? Attachment : Screenshot_2025-10-21-09-44-33-87_40deb401b9ffe8e1df...
	Effect of Mitsu PAR WT60 Wireless Controller By DavidAlgarve, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I believe hat I have correctly installed the PAR WT60 on my FTC60 which was previosly (and is still) set up for Weather compensation, as attachment and which performed reasonably well last year. At...
	RE: Daikin Octopus installation update - I saw my first defrost. 😍😂 By RadWhisperer, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Have you considered the Thermostatic Mixing (Blending) Valve (aka Anti-Scald or Tempering Valve) that mixes the hot water with mains to control the temperature and maintain pressure. Usually mounted o...