Recent Posts

| Forums | Topics

Page 75 / 164 Prev Next

Posts with their shortened content
	RE: New build installation query By Paullacey, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa Attachment : PXL_20251028_081156923.jpg Attachment : PXL_20251028_081150690.jpg Attachment : PXL_20251028_081203982.jpg Attachment : PXL_20251028_081137463.jpg Are...
	RE: Melpump Users Anywhere? By DavidAlgarve, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@majordennisbloodnok Yes, a good explanation. My question, (obviously poorly put) was: Does the use of MelPump in any way interfere with communication between the Ecodan FT5/6 and the MelCloud app? Yo...
	RE: New build installation query By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Nice neat plumbing job! I cant see the plant room on the rather low resolution plan. Where is it? Also the key drawing 12327-1000030975 is too low resolution to read (and rotated through 90 degrees...
	RE: What should we do with our Aga? By Lenny, 2 weeks ago Forum Well & Truly Off The Grid
	We have an oil fired Marshall (similar to Aga). It has (had) separate burners for heating/DHW and cooking. Our ECO4 funded scheme insisted that there was no oil fired heating available so I removed th...
	RE: Daikin Octopus installation update - I saw my first defrost. 😍😂 By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	ah - not the greatest routing. Is it possible to insulate and/or isolate the pumps from the structure?
	RE: Mitsubishi Ecodan R290 10kW performance By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Not sure I agree with that. Thermodynamically lower deltaT=higher average emitter temperature for any given flow temperature = lower FT needed at the heat pump for any given emitter output = higher e...
	RE: Melpump Users Anywhere? By F1p, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	No, you can use either an existing MELCloud Adapter if you have one or a dedicated adatper.The advantage of the adapter is there is more & high resolution data (e.g. about defrosts) and con...
	RE: Mitsubishi Ecodan R290 10kW performance By RadWhisperer, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	My 4KW Daikin will heat my 180L tank in 30 mins to 48C. Most likely less demand but in the ball park. The COP is not as mine reports 2 at worst. I opened you first PDF and the first thing that jumped ...
	RE: New build installation query By Paullacey, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)

	RE: Melpump Users Anywhere? By Morgan, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@majordennisbloodnok are you saying that to use Melpump, one also has to have the gadget from @f1p ? I am soon passing control of my ASHP to Havenwise @hcas but would like the extra data (only) that M...
	RE: Mitsubishi Ecodan R290 10kW performance By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	This looks odd: Heat transferred = FDT.0633=183.0633=3.4kWPower consumed = 2.4kW 3.4kW delivered to the house is not unreasonable at current temperatures in a 7-10kW house, so that stacks u...
	RE: Help me keep the faith with my air source heat pump installation By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I think there may be some oddities about the COP reported by the app at present and possibly going forward. My app (v3.31 build 24435) no longer seems to report it directly and, since a couple of day...