Recent Posts
 
Notifications
Clear all

Recent Posts

 |  Forums  |  Topics
Page 16 / 60
Posts with their shortened content
RE: Commencing on an ASHP Installation Process  

By JamesPa, 1 week ago

  Anitfreeze valves, or at least the ends of antifreeze valves, should be exposed, the idea is that if the heating isnt on when the OAT approaches freezing, they get cold and open Personally I think the...
RE: Commencing on an ASHP Installation Process  

By Sheriff Fatman, 1 week ago

  @old_scientist I took a closer look behind the pump this morning. As I'd expected, there are two anti-freeze valves (as least I think that's what they are) which are deliberately exposed, along with ...
Mars RE: Installer Show  

By Mars, 1 week ago

  @hughf, I think we’ll organise an RHH session at Installer next year… it was a really interesting event and well worth it. We’ve got two new podcasts coming out soon: Inside the UK’s Heating Revolutio...
RE: Is this ASHP install OK?  

By ASHP-BOBBA, 1 week ago

  @el3b Hi, sorry to hear that, it is advisable to install the system level to allow it to function correctly and to prevent unwanted noise vibration or ware on the components. I have attached 2 types...
RE: Adding battery storage to SolarEdge PV system  

By JamesPa, 1 week ago

  That's concerning. I am currently looking again at the business case for batteries and the supplier I'm currently in closest contact with seems to base much of his argument on arbitrage, whereas you ...
RE: Installer Show  

By HughF, 1 week ago

  Good work James, unfortunately I couldn’t make it this year as I had personal things to attend to during a week off from my hectic job. Looks like you had a good visit. Really glad to hear that Mars m...
RE: Installer Show  

By Judith, 1 week ago

  Great report@James you've addressed a major problem/(opportunity!) in the heat pump eco-system
Transparent RE: Adding battery storage to SolarEdge PV system  

By Transparent, 1 week ago

  1: If your capital outlay is based on future income from a tariff that can't exist in future, then you're going to be sorely disappointed. The overnight 'cheap-rate' periods are based on Gas-Turbine p...
RE: Difficult positioning of air source heat pump  

By Sheriff Fatman, 1 week ago

  @rikiarn Out of intrigue, the thread reads as though Aira and Octopus are the only installation options you have considered, along with the Heat Geek option that was ruled out as being too expensive? ...
RE: Adding battery storage to SolarEdge PV system  

By nazuro1041, 1 week ago

  @transparent Thanks again.. A lot to take in... > That would apply if you have no solar-panels supplying the battery(ies) vie your new Sunsynk inverter. I was hoping I could ensure (in the Inverter...
Transparent RE: Adding battery storage to SolarEdge PV system  

By Transparent, 1 week ago

  Lots to think about then! Let's start with this diagram: Attachment : Off-Grid-battery6spG4.png a: On the left is your existing Consumer Unit (Distribution Board) to which an existing (green) s...
RE: Difficult positioning of air source heat pump  

By Rikiarn, 1 week ago

  Hello, Just wanted to update the forum about our journey to get the heat pump installed. Since my last email Aira surveyors came to the property but we were never provided the heat loss calculatio...
Page 16 / 60

 

 

 

Share:

Join Us!

Latest Posts

Members Online