Notifications

Clear all

New Fogstar 15.5kWh upright solution

vaugi · 2023-11-19T11:17:06Z

Just noticed Fogstar have a new upright solution (coming soon). Given that it's Grade A cells, battery heater, cell balancer and 8yr warranty at £2500 incl VAT, is there much point DIYing with a Seplos anymore (at least for single bank solutions)?

Page 2 / 10 Prev Next

Energy Storage

Last Post by Transparent 10 months ago

114 Posts

13 Users

34 Reactions

18.8 K Views

RSS

MisterB

(@misterb)

Reputable Member Member

Joined: 2 years ago

Posts: 139

24/02/2024 8:07 am

@GGW

'i see your viewpoint NOT' ????

The inverter will come with a Comms cable to connect to the BMS, you might want to look at an additional Comms cable if needed to connect to a laptop?

I picked up a pre used length of 6mm SWA which I ran between the house and the outside utility room. Depending on distance you might need some external Cat 6 cable to link the CT clamp to the inverter/incoming mains live supply

Not sure what cables are needed to connect the battery but I assume Fogstar will sell them anyway, already made up.

I (or rather the electrician ) used the same RCD protection etc set up as for my EV, he just swapped out all the breakers etc into a 6 way consumer unit and added an extra RCD, it included SPD aswell for additional peace of mind.

This post was modified 1 year ago 2 times by MisterB

ReplyQuote

GGW

(@ggw)

Estimable Member Member

Joined: 3 years ago

Posts: 51

27/02/2024 10:09 pm

@misterb apologies, I made a typo! And I can't edit it

On the battery cables, no - Fogstar does not apparently sell nor state the cable size needed...

So need advice on that.

I have 25mm2 cable, stated in the sunsynk manual - but the Fogstar aspect is not clear at all.

A rudimentary calculator states 120mm2 - seems excessive...

Got all the other bits, same as yourself.

This post was modified 1 year ago by Mars

ReplyQuote

MisterB

(@misterb)

Reputable Member Member

Joined: 2 years ago

Posts: 139

29/02/2024 8:15 am

I'm pretty sure I used 25mm2 cable. You are limited by size in what the Sunsynk terminals will accept.

👍

ReplyQuote

robl

(@robl)

Honorable Member Member

Joined: 3 years ago

Posts: 204

29/02/2024 9:04 am

I used 50mm2 cable, sunsynk 3.6kW to 100A givenergy breaker to 280L fogstar. 50 is the largest that fits all the above.

👍

ReplyQuote

MisterB

(@misterb)

Reputable Member Member

Joined: 2 years ago

Posts: 139

29/02/2024 6:57 pm

I definitely didn't do 50mm - I might have done 35mm but can't remember...

ReplyQuote

GGW

(@ggw)

Estimable Member Member

Joined: 3 years ago

Posts: 51

07/03/2024 10:28 am

@misterb @editor

So it has actually arrived.

Will post a decent update after I attempt an install this weekend.

👍

ReplyQuote

AdrianMc

(@adrianmc)

Eminent Member Member

Joined: 1 year ago

Posts: 16

07/03/2024 6:24 pm

OOOO exciting.

I'm waiting for mine to arrive. Have sold off my Plyontech batteries, as I wanted more capacity and this seemed like such great price. (Still expensive)

My Delivery delayed with the courier coming to Belfast.

Hope its simple as just connecting up the cables suppose be based on Plyontech some how.

Please post how you get on, maybe even YouTube video?

ReplyQuote

AdrianMc

(@adrianmc)

Eminent Member Member

Joined: 1 year ago

Posts: 16

11/03/2024 7:00 pm

@ggw How did your install go?

I'm still waiting for my battery to be Delivered. Been nearly over week since its supposed be delivered.

ReplyQuote

AdrianMc

(@adrianmc)

Eminent Member Member

Joined: 1 year ago

Posts: 16

14/03/2024 7:41 pm

Battery has finally arrived, It was rather difficult to get down flight of stairs with it being over 140kg. Out of the well packaged box. Done short Video of how it is so far

. Not connected up yet.

This post was modified 1 year ago by Mars

ReplyQuote

MisterB

(@misterb)

Reputable Member Member

Joined: 2 years ago

Posts: 139

14/03/2024 9:14 pm

@adrianmc looks very good!

ReplyQuote

AdrianMc

(@adrianmc)

Eminent Member Member

Joined: 1 year ago

Posts: 16

14/03/2024 10:22 pm

@misterb Thanks, may try to put some other videos up. I don't see any thing else online for this battery others may find it useful. Nor have I done YouTube video before.

ReplyQuote

Mars

(@editor)

Illustrious Member Admin

Joined: 5 years ago

Posts: 3392

15/03/2024 9:46 am

@adrianmc looks great. So you already have solar PV, and you’re just swapping out the batteries, Fogstar for your old Plyontech, is that right? And what’s the size/storage?

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast

ReplyQuote