Last seen: May 20, 2025
Thanks for the replies. Very helpful in understanding how things to a degree work. Im going to keep the upper temp at 30c at -3 and see if it contin...
So as I have glycol in the system am I able to some way or other deter the H/P from defrosting???
At 38c top end yes but as I said atm it’s down to 30c. how do you know when it’s defrosting??
Below are charts showing the hour before and hour after. Also a chart showing set temp/ room temp/ outside temperatures. iv no underfloor heating. ...
@jamespa similar for us. Our ashp cylinder is in the airing cupboard where very few pipes were insulated. So after I insulated them the other half...
Just compared the last 2 Januarys usage and they were more or less the same for me. 540KHw. Not sure on my Sq meters tbh but it’s typically 3 bed se...
You don’t need a legionnaire cycle to heat to 60c ?? As said, I don’t bother with a legionnaire cycle. My H/W loses very similar to yours.
I’m on a cheap rate night tariff and schedule mine to heat at 03.30am to the maximum of 60c. That may seem excessive but at 6.7p night rate it seems t...
Apologies Rob as I now understand what you were saying concerning the w/c controls the inside temperature depending on the outside temperature. So d...
At 5am it’s set to 20c then at 10.30pm it’s set to 18c
- 26 Forums
- 2,104 Topics
- 46.3 K Posts
- 62 Online
- 3,393 Members
Join Us!
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist I found the switching between tariff jus...
By Toodles , 4 hours ago
-
RE: Plug and play solar. Thoughts?
Have a read of my previous posts on so-called Balcony S...
By Lucia , 7 hours ago
-
@editor @bart Hi, I can see a few problems with your in...
By Brendon Uys , 10 hours ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
Well at least that solves the mystery of where the exce...
By JamesPa , 12 hours ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
"To tell you the truth, I don't know if HAL is homicida...
By Scalextrix , 12 hours ago
-
RE: Location of hot water isolation valve on cylinder
@rossowheels if you isolate the water supply in it will...
By ASHP-BOBBA , 1 day ago
-
The Importance of Radiator Balancing for Efficient Heating: Introducing the Flow Regulating Valve
It’s fascinating to watch how low-temperature heating i...
By Mars , 2 days ago
-
RE: Servicing Hitachi HP in rural Somerset
I'd give GreenGenUK a call or email them: sales@greenge...
By Mars , 2 days ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 2 days ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 2 days ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 2 days ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 3 days ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 3 days ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 4 days ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 4 days ago
Members Online
No online members at the moment