Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Dec 13, 2024
Ive just dug out the gubbins the installers gave me and in the Material List they have "Low Loss Header for maximised efficiency, avoiding short cycli...
Ah great - thanks Kev! (this is very useful to know as for years Ive been using the washing machine in 'Eco mode'. Its always taken much longer than...
How do I find out if I have a buffer, low loss header or similar? If I do have one, is it a case of turning it off? Ive just taken a photo showing t...
Hi, just thought Id give an update.Its been quite a good time to test recently (not that Ive been testing particularly diligently or scientifically!) ...
Thanks guys. I think Ill put the handheld stat in frost mode, just in case! Although as you say, if theres glycol in the system (which there is!) then...
Thanks Derek - thats one of the best explanations Ive read!! Funnily enough, changing the slope of the curve (as you suggested) was going to be my n...
Hi @Derek M . Ive been keeping daily logs, so thought Id give an update:Having both the upstairs rads (with TRVs open fully and stat set to 21c) and U...
Great - thanks Derek - I will do exactly that. I must say, the installers were really good and knowledgeable. I kept all email correspondence I had ...
Thanks. Other than lower the flow temp (again) is there anything else I can try on the Ecodan side of things? This week I will certainly try to low...
Ugh, apologies, I mis-spoke.Since this post Ive kept a daily log:8 DecemberConsumed: 76kwh (this was the starting figure showing consumption so far fo...
SPONSORS
Degrees of Separation
Latest Posts
-
Have you considered keeping your FF boiler and suppleme...
By Old_Scientist , 1 hour ago
-
RE: Who's your electricity provider and what's your tariff?
@toodles I invested on Miele a pair of frodge frozor wh...
By AgentGeorge , 3 hours ago
-
RE: Flushing system, cleaning and inhibitor
Flush and fill all complete. Octopus kindly gave us a...
By Old_Scientist , 3 hours ago
-
RE: Wood burner with ASHP - direct air?
For what it's worth I installed a wood burner in this o...
By BlizzardGreen , 4 hours ago
-
@editor Thanks for your response and recommendations. ...
By DavidB , 11 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
I think I saw a diagram for an exhaust air dhw tank wit...
By JamesPa , 1 day ago
-
RE: Indevolt Batteries UK Support & Info Thread
Thanks, however that's an answer to a subtly different ...
By JamesPa , 3 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles Such elegant symmetry. look at my lumpy bag of...
By Papahuhu , 4 days ago
-
RE: PV and battery long payback - sense check query
Quite probably not, but you can get a 32A relay and a S...
By JamesPa , 4 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s Look forward to making contact soon! Regards, To...
By Toodles , 4 days ago
-
I don't notice mine defrosting, and most of the time Im...
By JamesPa , 5 days ago
-
RE: Do I need to change the control unit when replacing my Ecodan Air Source Heat Pump
Kind of you, @calumm, but it was @f1p who did the heavy...
By Majordennisbloodnok , 6 days ago
SPONSORS
