Last seen: Nov 6, 2025
That part of the installation should be undertaken by a qualified electrician.So the cable size is their decision. They use look-up tables when deci...
Can I refer back to your first post in this topic? You stated your strategy was to use three battery packs.The only cables which have to carry a pos...
That will probably work fine, but is noisy and doesn't offer the optimal strategy. The output side of a fan has turbulent air.It's 'out of control' ...
I'm unsure of the sources from which you derived your initial list, but I'm pleased to see it being altered as others contribute to this topic. Low-...
I'll have to think a bit about the balancing method. I'm not familiar with the Active-Balancer you're using.The ones I have here are the larger/newe...
No, it's the existing Seplos BMS which will be getting warm.It should be burning off the extra voltage through its resistors.The whole point of a pass...
The active balancer is only measuring differential voltage. Since each wire has approximately the same resistance added to it by the fuseholder, the v...
Interesting points you're making @robl There is probably little harm in doing things unconventionally... especially when in discussion with others o...
That was also my interpretation.But it doesn't seem to me a feature likely to be used by those reading this Forum. Keeping a battery topped-up is us...
Welcome @jeepster So you seem to have started out at the Rolls Royce end of the market with Victron kit,to which you then add the tried & truste...
If you need more help @majordennisbloodnok then please ask. You can post a photo of wires leading from your Growatt connection ports if you'd like c...
To save you flitting all over the place, let me re-post here a basic introduction to Modbus over RS485 RS485 is a serial protocol which runs ove...
- 26 Forums
- 2,270 Topics
- 50.8 K Posts
- 163 Online
- 5,932 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Oil Boiler & Heat Pump Hybrid System
Thank you for those that replied, am disappointed that ...
By paultheheating , 2 hours ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@transparent Along with the right workers, they can’t b...
By Toodles , 2 hours ago
-
RE: Midea ASHP – how to set weather compensation
I have just looked at my heat pump 'long interval' (27 ...
By cathodeRay , 3 hours ago
-
RE: UFH downstairs and radiators upstairs balancing question
@toodles sorry, my bad. Its a 6 port LLH. ...
By davidnolan22 , 3 hours ago
-
RE: My DIY Heat Pump installation
@grantmethestrength That is kind Attach...
By Polar bear , 5 hours ago
-
RE: balancing radiators with a mixture of different size pipework and a few undersize rads.
In short yes. Balancing so that delta t across the r...
By JamesPa , 5 hours ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
Hello. The Ecodan pump worked well last season, but thi...
By meehow , 18 hours ago
-
RE: Jokes and fun posts about heat pumps and renewables
Did @mark-hall really just say that?! 🤯 He drop...
By Mars , 22 hours ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
Oh completely, he even said without the hydrau...
By Crimson , 22 hours ago
-
We privatised electricity (back in the 80s I think) so ...
By JamesPa , 22 hours ago
-
RE: Electricity price predictions
So he must have a good team helping him in this.. ...
By Batpred , 1 day ago
-
RE: Help me keep the faith with my air source heat pump installation
There is no such thing as a silly question! @toodles ...
By JamesPa , 1 day ago
-
RE: Who has a V2G EV installation
Would that be a Chint RCD perhaps? Have a look at thi...
By Transparent , 1 day ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
11.2kW Ecodan Manufacturer: Misubishi Model: PUZ-WM...
By DRB01 , 2 days ago
-
RE: Homely asking about Solar Panels.
@majordennisbloodnok I will report back with any develo...
By Toodles , 2 days ago
-
RE: Mediation with RECC, what's your experience?
@editor Thank you, I really appreciate it! I've made ...
By TreeWizard , 2 days ago
-
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
Are you able to post a photo of that 180-litre cylinder...
By Transparent , 2 days ago

