Last seen: Nov 4, 2025
@ivanopinion Or could it be that they are staying below the application for PP level? Regards, Toodles.
@retrorich It is very worrying that any of this should be necessary though, having third parties involved to fit and commission heat pumps seems to p...
@bontwoody I might add that the control wiring indicates to Eddi that the temperature required by the PCM closest to the element has reached temperatu...
@cathoderay If you can see them hills, it is going to rain - if you can’t see them hills, it is raining. 😉
@cathoderay 🤣 🤣 Toodles
@jancold The PCM is heated up by a 3 kW element in the version I have (there are others where a high temperature heat pump can do the same thing inste...
Now, I know that this may be a little simplistic and perhaps not a true reflection on the actual costs on a given tariff but here goes… (All calculati...
I have just received my OE bill for April - May and my average unit cost on Agile has worked out at 10.52 p p kWh. I feel sure that this tariff is bet...
@bontwoody I think the system we have (Sunamp Thermino) is a move in the right direction to reduce this wastage. Though the capacity is the equivalent...
@hcas 😀 Toodles.
@jamespa And here is an interesting presentation from Heat Geeks on the subject: Regards, Toodles
@technogeek I fear we do not know how ignorant we are! 😉 Toodles.
Latest Posts
-
RE: Midea ASHP – how to set weather compensation
@mosibi — I, and I suspect others, am interested to kno...
By cathodeRay , 25 minutes ago
-
RE: Electricity price predictions
Is the distance between those new farms and where the e...
By Batpred , 9 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
@jamespa hopefully after the rad balancing it will perf...
By AdamK , 9 hours ago
-
RE: UFH downstairs and radiators upstairs balancing question
@davidnolan22 Hi, ok first of all it very hard to truly...
By ASHP-BOBBA , 12 hours ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
Installers coming tomorrow. One has messaged messaging ...
By Crimson , 12 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
11.2kW Ecodan Manufacturer: Misubishi Model: PUZ-WM...
By DRB01 , 12 hours ago
-
RE: Homely asking about Solar Panels.
@majordennisbloodnok I will report back with any develo...
By Toodles , 15 hours ago
-
RE: Mediation with RECC, what's your experience?
@editor Thank you, I really appreciate it! I've made ...
By TreeWizard , 17 hours ago
-
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
Are you able to post a photo of that 180-litre cylinder...
By Transparent , 19 hours ago
-
Agreed. It doesn't take all that much maintenance to ke...
By Majordennisbloodnok , 21 hours ago
-
RE: Oil Boiler & Heat Pump Hybrid System
OK. Got it. As a fellow rural West Country resident, ...
By Transparent , 22 hours ago
-
RE: My DIY Heat Pump installation
@pollar-bear Top job, I installed my own too and even t...
By bontwoody , 23 hours ago
-
RE: Who has a V2G EV installation
Not sure how you got that information, @batpred. As of ...
By Majordennisbloodnok , 24 hours ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
Ok so that seems to be the key point namely only mcs ca...
By JamesPa , 2 days ago
-
RE: One flow valve appears to be duff
You might want to consider the following common faults:...
By IaAck , 2 days ago
-
RE: When to use Octopus Intelligent Go tariff with my heat pump and battery
We are on the Intelligent Octopus Go tariff. We instal...
By GrahamF , 2 days ago
-
RE: New build installation query
@paullacey While the others wait for more info do you m...
By ASHP-BOBBA , 2 days ago
