
Last seen: Jul 9, 2025
This is exactly the same issue we had with our installation a year ago. We had the missing energy data. We also had a 3rd party thermostat which meant...
30th November was a bit cold we operated a setback to 16C and still got a TOPUP in the middle of the night Room temp is black line. Green is Outsi...
this mornings HP activity here concurs with harryup and cathoderay Regarding defrosting. the fan definitely stops so there is just the circulating p...
Have you had the strainers and metal filters cleaned out? There is a sump on the isolation valve on the outdoor return pipe which has a steel strainer...
Hi Kev and Ray Our heating was on a low setback so it was inactive for heating purposes. This allowed us to see the auto-reheat for defrost purposes...
Hi Greekgod I thought you might have known…. All heat pumps are made by the Greek goddess of Mischief, Delusion and Folly. Have you or your installe...
Morgan, try this Mitsubishi video. It shows how to set a On off schedule and vary temperatures along the time line. Just remember that Auto adapt...
here is yesterday’s temp drop chart. I forgot to include And todays so far
Not sure information this helps your modelling but here goes nothing: our house is empty and has been slowly cooling down since Saturday the initi...
Yes we’ve noticed and have used a small mid point kink in the WC curve. Our reasoning for trying this is that we have a large expanse of glazing in th...
Hi Kev. Have you had any results from new settings of temp differentials? i altered my wc curve and interval plus shortened temp differential. we ...
Thanks for your kind words. Operating at 18c should give you a good COP and, as you’re charts suggest, an even temp. I have found a useful temp sett...
- 26 Forums
- 2,104 Topics
- 46.3 K Posts
- 130 Online
- 3,393 Members
Join Us!
Latest Posts
-
RE: Ripped Off: How UK Homeowners Are Paying Gas Prices for Wind Energy
@chandykris Horses and beggars…. 😉 Toodles.
By Toodles , 4 minutes ago
-
RE: Cleaning up after gas meter removed
@agentgeorge Likewise in the loft space; we have 300mm ...
By Toodles , 8 minutes ago
-
RE: Victorian Semi Retrofit / Extension ASHP and UFH Advice
I have a he 7kW Vaillant which is good. My comment wou...
By JamesPa , 2 hours ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
This particular example is one of the worst I have seen...
By JamesPa , 6 hours ago
-
-
RE: Fan running in hot weather ...why?
I wonder if it has some kind of pressure transducer to ...
By ASHP-BOBBA , 19 hours ago
-
RE: Cooling with Samsung Gen6 and Flow error
@iaack The system isnt running long enough for any cond...
By EcoBaker , 1 day ago
-
@heacol thanks for confirming we can only hope NAPIT ag...
By Bart , 1 day ago
-
RE: BUS Grant: removal of all other fossil fuel heat sources
@editor If it is of any interest, we had the BUS grant,...
By Toodles , 2 days ago
-
Sorry to hear that @bruce. Sadly I’ve heard from multip...
By Mars , 3 days ago
-
RE: Crystal Ball Time: Communal or even Area Energy Storage?
I am invested in a couple of listed energy storage fund...
By Old_Scientist , 3 days ago
-
RE: Who's your electricity provider and what's your tariff?
That would be my biggest commitment -time to gain great...
By SUNandAIR , 3 days ago
-
RE: Who has a V2G EV installation
As has been discussed on other threads, trying to justi...
By Majordennisbloodnok , 4 days ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
Thanks @mikeh. Then I will also go back to non smart ta...
By ChandyKris , 4 days ago
-
RE: Location of hot water isolation valve on cylinder
@transparent Thank you so much and very helpful. Earlie...
By rossowheels , 5 days ago
-
RE: Plug and play solar. Thoughts?
Have a read of my previous posts on so-called Balcony S...
By Lucia , 6 days ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
"To tell you the truth, I don't know if HAL is homicida...
By Scalextrix , 6 days ago