Activity
 
Notifications
Clear all
SUNandAIR
SUNandAIR
@sunandair
Member
Noble Member
Joined: Dec 30, 2022
Last seen: Jul 9, 2025
Topics: 5 / Replies: 495
Reply
RE: How to make me regret installing a heat pump

I’ve read your posts over many weeks with interest Judith. But can’t help thinking “a lot is happening” is a distinctly relative term in view of the ...

8 months ago
Reply
RE: Shutting down heating when out for the day - data

When it comes to comfort and recovery I totally agree. But you did use the word Trump which did make me shiver quite a bit this morning. 🤡

8 months ago
Reply
RE: Ecodan FTC6 DST reminder

Yes @ecodan-prisoner... agreed it’s a bit annoying. I’ve adjusted the Summer Time setting to OFF and the time was auto adjusted back by one hour. S...

9 months ago
Reply
RE: Minimum ASHP outputs?

Behaviour of compressor is subtly different as flow temperature is dropped to 34 and 33c. The original lowest flow temp of 35c as set on weather compe...

9 months ago
Reply
RE: Minimum ASHP outputs?

At first I tried 32c for about 10days. It was ok but still cycling a bit too much. So I took it straight to 35c. But you make a valid point. A small...

9 months ago
Reply
RE: Minimum ASHP outputs?

Interesting article… thanks for posting @robs. So to summarise:- Of the 365 days of the year our heat pumps will try to operate for 160 days at less...

9 months ago
Reply
RE: Minimum ASHP outputs?

it took me a while to learn how and to work out output correction factors for 30c and 35c flow temperatures. Here’s my best attempt as written back th...

9 months ago
Reply
RE: Minimum ASHP outputs?

point1. I'm pretty sure it just means output, using the word capacity in this way isn't unusual in Japanese documents (and if something has a capacity...

9 months ago
Reply
RE: Minimum ASHP outputs?

@robs, and other contributors I have been working on our minimum operating output using these charts for about a year now. There is no notes on how...

9 months ago
Reply
RE: MelCloud readings

Hi @davidalgarve It’s interesting to hear your thoughts on the wireless remote and why it might be confusing for others. I hope you can see from...

9 months ago
Reply
RE: MelCloud readings

Hi @davidalgarve the room temperature thermistor (sensor) is located in the display unit. It’s value is also displayed in the Thermistor Reading...

9 months ago
Reply
RE: Ecodan - flow rates, sensors, settings

I presented several pieces of data to try to convince that I’d done a fare bit of reading and testing. I think my install designer was as much swayed ...

9 months ago
Page 12 / 42
Share:

Join Us!

Latest Posts

Members Online