Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jan 24, 2025
Hahaha! @derek-m thanks for that, you have basically prempted my next question around cycling and what it actually is! However I will still clarify ...
@editor what does 'too low' look like? Not that we're ever likely to hit it, but from what i've read I'm guessing 35 is the minimum you'd want to run ...
I assume to compensate for this, you can just get it designed to a higher flow temp and then just keep it lower in the real world?
@transparent I thought is was something to do with being able to claim the BUS..? @mars that make at least more reasonable sense, this guy said all ...
I’ve been away doing a lot of additional reading, watching you tube and sending email enquiries since the last time I was here! In addition to having ...
@transparent thanks again! I've been sending emails out this week to mutiple assessors who are listed a retrofit assessors for the PA2035 survey, so...
@derek-m @hughf thanks for the spreadsheet, it should come in useful, if not only to grasp and understanding of how the calculations work! I also ca...
@derek-m thanks for your input and suggestions. Your assumptions where pretty mcuh spot on, however I will try to provide some more information abou...
@transparent thanks for your continued comprehensive responses! It's taking me a while to get my head round everything, but the more times I read your...
Sorry, I just realised that was a lot of solar talk in ASHP thread! Maybe I'll start another thread for the solar! Now to get back on track...! ...
Thanks to whoever moved my thread, I was wondering what had happened for a moment!! @transparent a couple of questions for you: I've read up on ...
@transparent that was a lot of words and terms of which many will require some further research! 😆 I will say though, that the solar install has be...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist Yes, an EV changes everything drasticall...
By Papahuhu , 7 minutes ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
Sooooo, what did we do in the end? We approached three ...
By Penval , 7 minutes ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 5 hours ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 7 hours ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 7 hours ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 8 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 1 day ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 1 day ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 2 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 2 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 3 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 3 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 3 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 4 days ago
SPONSORS
