Last seen: Oct 14, 2024
These numbers are for the whole house - including the ASHP. June for example - 417kwh - 344 from PV and 73 from grid - looking at octopus bill - this...
that stats I'm quoting for electricity usage come from my Fusion Solar App
OK - a couple of pictures showing the consumed electricity v delivered energy. Might sound a stupid question - but says in december consumed was 516 ...
OK day 4 of experiment - outside temp today cold - it's 09:00 and still about -1 and overnight up to -3 usage so far - 14kwh usage yesterday 32 kW...
OK - another 24 hours of my experiment: usage yesterday: 18 kwh so far today 12 kWh (I'm recording usage at same time each day) overnight te...
PS It took most of the day for the temp in bathroom and bedroom - at 19:30 last night - 10 hours after I increased the temp for each controller, the b...
OK - so 24 hours later and all zones are showing 16 degrees - including the (what was) frost setting bathroom - which hasn't seen that since the summe...
This is my new settings and pictures of each controller and also the electricity used so far today. Yesterday I used 18kWh and today the weather is s...
@harriup I don't have the little box. The house is detached. House built on a slope (where I live very hilly!) - back garden was reached by steps fr...
@kev-m you're right with what you say - I do use thermostats in the three zones. The bathroom has always been low because it always seemed to be call...
@harriup I'm not sure about melclod - certainly never used this since we've had the system installed. It makes sense what you say - we do have stairs...
@mjr This is what I see on settings - looks like it's set to target room temperature mode - if I change to target flow temperature - then 47degr...
- 26 Forums
- 2,233 Topics
- 49.7 K Posts
- 270 Online
- 5,898 Members
Join Us!
Podcast Picks
Latest Posts
-
@old_scientist Well it does seem pretty evident that it...
By bontwoody , 1 minute ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
... But then what's the point (what value is added in r...
By JamesPa , 3 minutes ago
-
Which brand of charger do you have at the moment, @batp...
By Majordennisbloodnok , 59 minutes ago
-
RE: My experience with 3 heat pump surveys: Heat Geek, British Gas & Octopus
@jords thank you for an informative description of your...
By downfield , 2 hours ago
-
RE: Effect of Mitsu PAR WT60 Wireless Controller
@sunandair We were not present to do a tidy changeover ...
By DavidAlgarve , 3 hours ago
-
RE: Octopus Cosy & Octopus EV + bidirectional smart tariff, together. What, eh?
Well, it sounded all too good to be true. And it was. ...
By AllyFish , 5 hours ago
-
I’m frankly amazed you think anything I have posted on ...
By Majordennisbloodnok , 5 hours ago
-
RE: Master & Slave Zones/Setback
In principle you probably don't at present given it's (...
By JamesPa , 7 hours ago
-
RE: Replacing knackered oil boiler with Samsung ASHP - Perthshire
Thanks for your full reply @mike-h. It certainly cleare...
By DowallyDrifter , 8 hours ago
-
RE: Daikin Octopus installation update - I saw my first defrost. 😍😂
I don't seem to have a mixer valve. Just pressure regul...
By Jancold , 9 hours ago
-
RE: New Fogstar 15.5kWh upright solution
😁Yes, the 90Amps capacity in total in an 8k inv...
By Batpred , 9 hours ago
-
RE: Question about Heating Pump Operation mode – Ecodan FTC6 v20.06
Thanks, I have à split model so there is no water circu...
By Johj45 , 24 hours ago
-
RE: Say hello and introduce yourself
This discussion has gone quite deep for our Hello &...
By Transparent , 1 day ago
-
RE: Midea ASHP – how to set weather compensation
@pash44pump - it sounds as though you are close to havi...
By cathodeRay , 1 day ago
-
Let's see if we can tempt @glyn-h to give his insights....
By Mars , 1 day ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
Let's first note what those parameters are. They are ...
By Transparent , 1 day ago
-
I’ve met the Flexi-Orb team, and they come across as ge...
By Mars , 1 day ago
-
Webinar on "Heat Pumps for Home Owners" Thursday 20...
By Mars , 1 day ago
-
RE: Help me keep the faith with my air source heat pump installation
@grantmethestrength also i need to check the other stra...
By AdamK , 1 day ago