Last seen: Jan 21, 2025
This image shows ecodans kwh usage over last 4 wks. On 27th Dec changed settings to compensation curve, I know weather has been very mild, but very ha...
Great info Mark C, we are here most of the time. As we have only lived here 6 weeks its hard to get our heads around this. I just want it to be comfy ...
Thanks Derek and Kev super impressed by your response. In answer Derek we have 5 rads upstairs with Trv's 2 towel heaters without Trvs. All controll...
So sorry Kev M I'm finding the whole thing confusing 🤯. So if I turn my thermostats for the ufh up to 30 it will just call for heat all the time is th...
So Ive set up comp curve as Derek advised but I have a question what do i do with the wall thermostats for UFH do i leave them on manual? If yes at wh...
Sorrry forgot to ask re rads would aluminium or cast iron rads work with ashp low flow as long as they were K3. Do they even do K3 cast iron.
Thanks Rusty I know absolutely nothing about heating and never thought I would need to ! Then bought this house (with a ashp so had to quickly learn....
Thanks so much MarkC brilliant information. Good to know that tank does not need to be insulated.
Thanks Rusty, great info, learning loads.
Hi Derek I don't think so, see images re what I think are the control valves, I have a manifold too in cloakroom thats always lovely and warm.
Thanks for replies. Yes Derek the system has been zoned zone 1 is downstiars zone 2 is upstairs. I'll have a go and will let you how the weather co...
Hi Derek sorry no heat loss calcs system already in place when we moved in the epc rating was B. Other than that i wouldn't know where to start. ...
- 26 Forums
- 2,233 Topics
- 49.7 K Posts
- 257 Online
- 5,898 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: My experience with 3 heat pump surveys: Heat Geek, British Gas & Octopus
@jords it sounds as though you have been having a frust...
By GrahamF , 7 minutes ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
@jamespa the point is it allows variable secondary flow...
By AllyFish , 1 hour ago
-
RE: PV Panels on roof in Conservation Area
Update: .... Council said, "Yes", to installing PV &am...
By colinc , 2 hours ago
-
@old_scientist Well it does seem pretty evident that it...
By bontwoody , 3 hours ago
-
Which brand of charger do you have at the moment, @batp...
By Majordennisbloodnok , 4 hours ago
-
RE: Effect of Mitsu PAR WT60 Wireless Controller
@sunandair We were not present to do a tidy changeover ...
By DavidAlgarve , 6 hours ago
-
RE: Octopus Cosy & Octopus EV + bidirectional smart tariff, together. What, eh?
Well, it sounded all too good to be true. And it was. ...
By AllyFish , 8 hours ago
-
I’m frankly amazed you think anything I have posted on ...
By Majordennisbloodnok , 8 hours ago
-
RE: Master & Slave Zones/Setback
In principle you probably don't at present given it's (...
By JamesPa , 10 hours ago
-
RE: Replacing knackered oil boiler with Samsung ASHP - Perthshire
Thanks for your full reply @mike-h. It certainly cleare...
By DowallyDrifter , 11 hours ago
-
RE: Daikin Octopus installation update - I saw my first defrost. 😍😂
I don't seem to have a mixer valve. Just pressure regul...
By Jancold , 12 hours ago
-
RE: New Fogstar 15.5kWh upright solution
😁Yes, the 90Amps capacity in total in an 8k inv...
By Batpred , 12 hours ago
-
RE: Question about Heating Pump Operation mode – Ecodan FTC6 v20.06
Thanks, I have à split model so there is no water circu...
By Johj45 , 1 day ago
-
RE: Say hello and introduce yourself
This discussion has gone quite deep for our Hello &...
By Transparent , 1 day ago
-
RE: Midea ASHP – how to set weather compensation
@pash44pump - it sounds as though you are close to havi...
By cathodeRay , 1 day ago
-
Let's see if we can tempt @glyn-h to give his insights....
By Mars , 1 day ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
Let's first note what those parameters are. They are ...
By Transparent , 1 day ago
-
I’ve met the Flexi-Orb team, and they come across as ge...
By Mars , 1 day ago
-
Webinar on "Heat Pumps for Home Owners" Thursday 20...
By Mars , 1 day ago