Last seen: Jul 6, 2025
@burtis Hi. In my case I don't think the noise is to do with the external pipework as we would then get the noise when just running DHW. Just a small ...
@allyfish Thanks. I was hoping that having no clamp was the reason for the excessive noise. Guess I'll need to wait for the installer to visit. No...
@allyfish Thanks. One end of the pipework has a bracket to a roof strut and has rubber at the joint to the joist. However the other end (out from th...
@allyfish Thank you for your comments. I have only just started to use the heating side of my installation but fear that I have exactly the situatio...
Hi. Unfortunately on-going. Mitsubishi agreed that the immersion was taking too long and also pointed out that my software was out of date. Instal...
@editor Thanks. I, of course, thought something was wrong with the timings but wanted to be sure what is normal before contacting my installer or Mi...
@abernyte Thank you for your reply and I agree that it's debatable as to whether a legionaires cycle is necessary. However, we are classed as vulnerab...
@hcas That's interesting. There must be some sort of algorithm or AI going on. Maybe similar to what Homely does? How do you use weather station dat...
Not sure why my original thread has gone down this route. Anyway, thanks to everyone for your comments.
@jamespa Thanks.
- 26 Forums
- 2,102 Topics
- 46.2 K Posts
- 37 Online
- 3,388 Members
Join Us!
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
Thanks @toodles for the update. My PW3 is due to be i...
By Old_Scientist , 43 minutes ago
-
RE: Plug and play solar. Thoughts?
Have a read of my previous posts on so-called Balcony S...
By Lucia , 2 hours ago
-
@editor @bart Hi, I can see a few problems with your in...
By Brendon Uys , 5 hours ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
Well at least that solves the mystery of where the exce...
By JamesPa , 7 hours ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
"To tell you the truth, I don't know if HAL is homicida...
By Scalextrix , 7 hours ago
-
RE: Location of hot water isolation valve on cylinder
@rossowheels if you isolate the water supply in it will...
By ASHP-BOBBA , 23 hours ago
-
The Importance of Radiator Balancing for Efficient Heating: Introducing the Flow Regulating Valve
It’s fascinating to watch how low-temperature heating i...
By Mars , 1 day ago
-
RE: Servicing Hitachi HP in rural Somerset
I'd give GreenGenUK a call or email them: sales@greenge...
By Mars , 1 day ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 2 days ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 2 days ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 2 days ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 3 days ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 3 days ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 3 days ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 3 days ago