Forums

Forums
Members
rhh2348
Activity
 
Notifications
Clear all
rhh2348
@rhh2348
Member
Reputable Member
Joined: Feb 2, 2024
Last seen: May 9, 2025
Profile Activity
Topics: 9 / Replies: 89
AllTopicsReplies
Reply
RE: Determining correct flow rate?

How do people find switching from DHW to space heating in respect of the flow and return temps? For example, going from a 52C flow (for 47C DHW temp)...

10 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Determining correct flow rate?

I asked the question to gain more understanding in the context of the flow/return temps rather than that being what I wanted to/was planning to achiev...

10 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Determining correct flow rate?

I lowered my flow rate to c. 11L/m for the Ecodan and the heat/power output went down to c. 3.8kW :-/ The deltaT remained around 5 so I assume Ecodan...

10 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Determining correct flow rate?

This may seem like a daft question but can I please check - one should always aim for their systems to have a return temp of <target temp> + dT ...

10 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Determining correct flow rate?

so conversly, flowrate = heat / 4.18 / deltaT Using 6kW as power ('heat'), 6 / 4.18 / 8 * 60 (to get lpm) = 10.77lpm, or the 10.8 I quoted - nice. ...

11 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan - Legionella Operation Time and Target Temperature

@Richard24738 - how did this pan out?

11 months ago
Forum
Air Source Heat Pumps (ASHPs)
Topic
Determining correct flow rate for a heat pump
11 months ago
Forum
Air Source Heat Pumps (ASHPs)
Replies: 23
Views: 6028
Reply
RE: Ecodan - flow rates, sensors, settings

Nudging this thread to see if any other Ecodan can share their experiences of their set up and how it behaves when heating water. [quote]Further...

12 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan - flow rates, sensors, settings

It can be controlled using PWM (profile A), yes, but we don't have a 2nd plug connected at present. I think this is the next area I'm headed ...

12 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan - flow rates, sensors, settings

It's on the return before the mag filter so I assume so. Good points. Yep, already done/doing - though it feels like the effects on readin...

12 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan ASHP - How to optimise my set up?

That would seem logical, however do you know if the FTC (via pump speed setting) can control third party pumps, or only their own? I know the Grundfo...

12 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Ecodan - flow rates, sensors, settings

As mentioned above, the one I have 1) has the MITSUBISHI suffix after the VVX20, and 2) states 5..80 lpm on the front - I can't find much info or suff...

12 months ago
Forum
Air Source Heat Pumps (ASHPs)
Page 6 / 9
Share:

Join Us!

RHH Awards

👉 Vote for “Heat Pump of the Year”

👉 Vote for “Best Manufacturer Customer Support”

👉 Nominate “Heat Pump Installation of Year”, “Best New Tech or Innovation” or “Turkey of the Year” here!

Latest Posts

Members Online