Last seen: Jul 2, 2025
Seems uniform across the site. The initial response is a little quicker now than when I posted earlier - still a delay, but only 1-2 seconds. Pages ar...
I get a 3-5 second delay before anything appears to happen, but then the page loads very quickly. The initial delay seems quite consistent and makes t...
Rather than looking at average energy usage for Feb, do you know what your gas usage was for the coldest day last winter (or the day with your highest...
I agree it's not very helpful. Generally, the max heat output at -2C is going to be a little lower (maybe 3-5%) that the figure at -7C. That may sound...
Firstly, most of the heating season in terms of time, but not in terms of energy usage. You will use more energy in the coldest two months than you do...
I think this is a good point. We have a massively oversized heat pump (12kW ASHP for a heat loss closer to 4kW), but we have large radiators that al...
@grahamh-uk You can switch tariffs with Octopus instantly - I've switched back and fore a couple times between Cosy and Agile, and the switch is insta...
My heat loss survey came back at 7.4kW We keep our house a little cooler than design temp, at around 19-20C, and 18C overnight. On the coldest day l...
@grahamh-uk Yes, I have the same Samsung controller panel as you. I take photos of the use and generation numbers daily, simply so I can then add th...
I thought I'd share my story/journey and experiences here (not sure if it's the best location, but much is relevant to this topic). I have an existi...
@grahamh-uk thanks for the update. I had considered adding the WiFi module but didn't due to the cost. Like you, I collect the energy used and generat...
Indeed it does. Brilliant, thanks @jamespa
Latest Posts
-
RE: Heating coming on when not required
@editor Thats correct. Its not particularly cold but th...
By bontwoody , 2 hours ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 4 hours ago
-
RE: Pressure drop Primary circuit
Just to update you all. I made up my own fill loop as...
By ohdearism , 4 hours ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
Hmm Before doing that I would want to be certain that...
By JamesPa , 9 hours ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 9 hours ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 20 hours ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 1 day ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 1 day ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 2 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 3 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 3 days ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 3 days ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 4 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 5 days ago
