Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 21, 2025
following on from above 9 The final part of the internal assembly was to ensure all connections were tight and to connect the BMS to...
@transparent I've already done one with photos and sent it to Fogstar AND Seplos. I posted a link earlier in the thread Seplos Mason Mob...
i followed the advice given on this you tube video - i also followed the advice by his dad when he just used a simple wire setup to connect for the to...
Thankfully I have an electrician who deals with all our rental properties, who installed the current Sofar inverter.
@chickenbig thanks, for some reason the filter was set to berween 3 and 6 kw DOH! i think i need to make this a different topic, as it is...
Am I looking in the wrong database please? I am looking in the Type Test Register and there is no result found for them. Even when I search just by Su...
Is the 8.8 on the approved list? I actually think the 5kw or 5.5kw will meet my needs. So long as I can charge at around 5kw from the grid at off peak...
[/quote] For more power I think you might have to just upgrade your solar and battery setup with a nice hybrid inverter; something like a Sunsynk EC...
another reason NOT to even hunt down a Sofar HYD 6000 EP is that ir is NOT on the approved list, which i should have checked !!!
Thanks for that, obv I need to go to spec savers lol! I'm still looking for an inverter that can deliver more than 3kw FROM the grid during off...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Cooling/heating with one unit
"The way we use A2A on a cheap overnight EV tariff is t...
By mrkfm , 58 minutes ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
We have ‘signed on the dotted line’ today for a Panason...
By Toodles , 2 hours ago
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
...or it was there and was lost thanks to laziness and ...
By Majordennisbloodnok , 2 hours ago
-
@bobflux Thank you for your response. I am trying to ...
By RonV. , 2 hours ago
-
This post is about how I successfully configured a buff...
By Tony.Stolz , 5 hours ago
-
The installer visited yesterday and suggested the noise...
By JamesChatz , 7 hours ago
-
RE: Heat Geek installations: share your experiences
I struggled with this problem as well. An independent t...
By L8Again , 8 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Your house sounds a lot like mine. 2 surveyors each sp...
By JamesPa , 9 hours ago
-
RE: Heat Geek Zero Disrupt: Are We Sleepwalking Into Another Race to the Bottom?
Thats true only if you do the wrong experiment. Done c...
By JamesPa , 10 hours ago
-
RE: How should the Boiler Upgrade Scheme be reformed?
@temperature_gradient Isn't that just describing a regu...
By Prunus , 10 hours ago
-
RE: battery storage without solar
As of October 1st they need specific qualifications to ...
By EtchedPixels , 23 hours ago
-
RE: Renewables & Heat Pumps in the News
With regards to the BUS grant raid, I gave it more thou...
By ASHP-BOBBA , 24 hours ago
-
RE: Why are ASHP installs so expensive?
The whole system seems to work on the basis of...
By ian33a , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Good plan. If you can get half hourly meter readings a...
By JamesPa , 1 day ago
SPONSORS
