RE: Recommended home battery inverters + regulatory matters - help requested

That matches the TN-C-S diagram here Your post crosse...

By JamesPa , 30 seconds ago

RE: Post-Traumatic Heat Pump Stress Disorder

Mars Excellent article. Love the term Post-Traumatic...

By trebor12345 , 2 minutes ago

RE: GSHP WOES! Midland based engineer recommendations?

Welcome to the forums @johnbroome. I'll see who in my n...

By Mars , 21 minutes ago

RE: Rate the quality of your heat pump design and installation

@razz stick with it. There's loads of advice on here. ...

By Stopbar , 1 hour ago

RE: ASHP Energy Consumption: Aira 12kW heat pump

@wally Hi I am not sure how large your house is b...

By TechnoGeek , 1 hour ago

Please help with the settings ecodan

I have a 160 square meter house, first floor 6 radiator...

By nose1972 , 1 hour ago

RE: Predicted Heat Loss & Needs from MCS calcs vs EPC vs actual

I've been thinking along similar lines to @tim441 from ...

By Sheriff Fatman , 2 hours ago

RE: Setback savings - fact or fiction?

Hi @sunandair Thanks. The chart shows all the power/...

By RobS , 2 hours ago

RE: Solcast thoughts.....

Thanks, @technogeek. Good to hear about the accuracy. ...

By Majordennisbloodnok , 2 hours ago

RE: Advice for a novice on Mitsubishi Ecodan 6kW

In my case it was a very specific pattern of behaviour ...

By Sheriff Fatman , 2 hours ago

RE: Vaillant aroTherm not heating with many faults

@ashp-bobba Yeah I'll give it a go, will check filter...

By Anon67 , 2 hours ago

RE: RDSAP10 effect on existing heat pump EPC rating?

@transparent Perhaps the names at the end of the docume...

By Toodles , 3 hours ago

RE: Heatpunk Floor plan issues

@jamiejones85 A2A they will design on dynamic heat loss...

By ASHP-BOBBA , 3 hours ago

RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP

I think the concern was about crud being forced from th...

By iotum , 3 hours ago

RE: Fan unit Making terrible noise HELP!!

can you post a video looking inside, at and through the...

By ASHP-BOBBA , 4 hours ago

RE: Heat pump not reaching flow temperature

@davec Ive had a look at the screenshots. Lots of th...

By JamesPa , 16 hours ago

RE: Power outages and storms: A surprisingly good DNO experience

Agreed, which is no more nor less than a customer shoul...

By Majordennisbloodnok , 21 hours ago

RE: Running from backup generaor in powercut?

@batpred In our case, 3 times each day when the Octopus...

By Toodles , 21 hours ago

RE: New Fogstar 15.5kWh upright solution

@batpred Here's the latest Fogstar ready built pack....

By Bash , 23 hours ago