Last seen: Jun 11, 2022
@derek-m here is all the info on my house, in terms of area, heat loss, & radiators. My Solar is still awaiting full commissioning, so I can't say...
Speaking of manuals, here are the links for the MMSP Quick Start Guide and the MMSP Hardware Installation & Configuration Guides. They explain wha...
@kev-m also note that the manual specifically says that you have to power off the whole system before you flick those dip switches.
@derek-m as they say, "Every little helps" 😀 Speaking of which, my COP just hit 5.1 - Thank you
The last thing that I did was to change the Flow Temperature settings at ~2pm on Monday 8th. I set them to 20C & 50C, as opposed to the default se...
@derek-m @kev-m I started following the advice from @derek-m & tweaking my curve at around 4:30pm on Saturday 6th My ASHP went live on Friday ...
@kev-m @derek-m I'm just getting my figures to respond to your ASHP thread to the question of curves, flow temps & outside temperatures.
@derek-m The electrician who is coming is very nice, & has proved to be more than helpful when it comes to answering my questions. I'm going to qu...
@derek-m My system currently has the basic, stock Ecodan monitoring built in. Alas, I don't have the MMSP setup, as they wanted to charge me an extra ...
@derek-m super good news. I set the target temperature on my Honeywell "controller" to 25°C, then went out for the afternoon. Happily, the Ecodan seem...
Press & Hold the Menu button, as normal. Once it goes into edit mode, scroll along until you get to the Settings icon & click OK The Qui...
@markc - apologies for not answering this one sooner. This is what mine shows when I press F3 from that screen
Latest Posts
-
RE: Cooling with Samsung Gen6 and Flow error
@iaack I've got cooling mode on the radiator selected, ...
By EcoBaker , 23 minutes ago
-
@heacol thanks for confirming we can only hope NAPIT ag...
By Bart , 32 minutes ago
-
RE: Ripped Off: How UK Homeowners Are Paying Gas Prices for Wind Energy
@jeff And now for something I have never noticed before...
By Toodles , 2 hours ago
-
RE: BUS Grant: removal of all other fossil fuel heat sources
@editor If it is of any interest, we had the BUS grant,...
By Toodles , 1 day ago
-
Sorry to hear that @bruce. Sadly I’ve heard from multip...
By Mars , 2 days ago
-
RE: Crystal Ball Time: Communal or even Area Energy Storage?
I am invested in a couple of listed energy storage fund...
By Old_Scientist , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
That would be my biggest commitment -time to gain great...
By SUNandAIR , 2 days ago
-
RE: Who has a V2G EV installation
As has been discussed on other threads, trying to justi...
By Majordennisbloodnok , 3 days ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
Thanks @mikeh. Then I will also go back to non smart ta...
By ChandyKris , 3 days ago
-
RE: Location of hot water isolation valve on cylinder
@transparent Thank you so much and very helpful. Earlie...
By rossowheels , 4 days ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
It does indeed look like that, @skyefarmer. There is ...
By Majordennisbloodnok , 4 days ago
-
RE: Plug and play solar. Thoughts?
Have a read of my previous posts on so-called Balcony S...
By Lucia , 5 days ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
"To tell you the truth, I don't know if HAL is homicida...
By Scalextrix , 5 days ago
-
The Importance of Radiator Balancing for Efficient Heating: Introducing the Flow Regulating Valve
It’s fascinating to watch how low-temperature heating i...
By Mars , 6 days ago
-
RE: Servicing Hitachi HP in rural Somerset
I'd give GreenGenUK a call or email them: sales@greenge...
By Mars , 6 days ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 7 days ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 7 days ago
