Last seen: Apr 9, 2025
So according the design info, Heat Loss: 9.99kw @ -2c Target: 440% efficiency at 40oC max flow temperature. I’ve not been running nowhere ne...
@lucia your reply must have helped my data came back today 😀
@ectoplasmosis perfect this now makes total sense to me.
@ectoplasmosis so it constantly breaches that number and turns on. I do know if I switch to expanded then it adheres to that temperature. So I guess...
So this is it, what is my chosen set point, how does it get that? Considering the Room Temp Mod explanation and mine is set to Inactive. I...
If I am in inactive mode, then how or when does setback kick in? Timer mode lets you specify a time and a temperature but as inactive the temperatur...
Got it. Thank you. and now Valliant seem to have made my energy data disappear have to wait till it loads back to see what’s been happening. dam...
Ok so during a timed period it will work to hit the design temperature via flow rate regardless of internal temperature and non timed hours run heat c...
so this is on Valiant aroTHERM and my settings has the the room temp mod now set to inactive, so essentially no thermostat, hence my question what the...
Thanks for that. The only thing I cannot figure out is that I am in timed mode, pretty sure its ignoring that as I had a set temp of 20.5 and it hea...
Latest Posts
-
RE: Is this just haze or something more?
I think the present somewhat cooler hazy days show the ...
By Judith , 23 minutes ago
-
I agee with that. I suspect however that the structur...
By JamesPa , 34 minutes ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
All noted and accepted and as I say I am sorry that you...
By JamesPa , 2 hours ago
-
I think it is very much me that is sitting outside the ...
By Grantmethestrength , 4 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
I've reduced my debit to £10/month For end July it sh...
By Tim441 , 7 hours ago
-
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 1 day ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 1 day ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 1 day ago
-
RE: 300 Liter Tank - Do I have to heat it all?
I agree with @morgan. You can turn down the target t...
By JamesPa , 1 day ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 2 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 3 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 3 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 3 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
I would deffo install an additional slinky run, especia...
By Transparent , 3 days ago
-
RE: Say hello and introduce yourself
@editor fab - thanks Mars, and keep up the great work o...
By normpang , 3 days ago
-
RE: Compressor and Evaporator Stratification
@trebor12345 So I think the 1st zigzag section shows so...
By ASHP-BOBBA , 4 days ago
