Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 20, 2026
Noting your most recent post it's perhaps worth commenting on the question you asked earlier. The answer is a definite maybe. Designs are based on ...
The relaxation of the 1m rule has the potential to reduce noise, because it becomes possible to site ( or take advantage of) barriers more flexibly. ...
Interesting that the Telegraph online headline appears to be 'Government to relax noise restrictions on heat pumps for net zero' Which appears to ...
@jeff can you provide the link please? This is one of those cases where the detail matters!
@jeff The report I saw also said that the change would be 'when legislative time is available'.
An Aircon unit is an air to air heat pump. I think you already have all you need. A2A should get you good cop so should save relative to the ir heat...
I would say its difficult to say. However 12m is a long way to run pipes, particularly if you decide to go underground (which you probably want to to...
I read another report which says that the changes in PD also include increasing max volume to 1.5cu m and allowing 2 heat pumps on detached houses. N...
The efficiency gain through weather compensation gets less at low flow temperatures, and is probably around 2% per C or less at 32 and you are already...
4 hours isn't very long, houses have a large heat capacity (ie energy stored in the fabric) and can therefore take a day or more to reach a steady tem...
Welcome to the forum, you will find that people here are very willing to help. To answer this properly we need to know a bit more eg what was the as...
Sensible IMHO, varying the target FT might give a clue!
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
Cloudy one done, might get the sunny one tomorrow or de...
By Watcher , 1 minute ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 17 hours ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 23 hours ago
-
At the risk of going on: A slight side issue for a foru...
By Bart , 1 day ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 1 day ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 2 days ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 2 days ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 2 days ago
-
RE: Advice on Vaillant Sensocomfort
Oops, I meant Sensocomfort (the UI to the controls)
By Batpred , 2 days ago
-
RE: Heat Pump Training vs. Real-World Installation
Our instal was very much the opposite. White haired blo...
By Batpred , 2 days ago
-
RE: Flushing system, cleaning and inhibitor
While skim reading a manual for our Vaillant HW tank, I...
By Batpred , 2 days ago
-
RE: 'Chinese Diesel Heater' to heat the home .....
Old thread but I'm new to the forum so new to me. How...
By BlizzardGreen , 3 days ago
SPONSORS
