Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 18, 2026
OK. Its good to hear you want to get it working and you do appear to have a good set of parts, so its a case of getting them set up a bit better. H...
Yes it will be protecting itself from freezing. You cant really stop this unless you decommission it completely. The question that you need to answe...
This is definitely a plumbing 'problem' not a heat pump problem, although it is linked to your heat pump installation. The pressure in the hot circui...
The ideal r290s are Midea clones (but with ideal controls) made I believe in china. To the best of my knowledge Mitsubishi and Vaillant assemble hea...
I dont think you attached the video.
Underfloor heating? - given you are putting insulation in between the floors its got to be worth considering although LB constraints may make it impos...
The MCS guidelines specify a certain volume per bedroom (I cant remember exactly what) so they will likely have got 400l from that. The penalty for...
@ajbevster If it's fully pushed in yes, better if it also had some tape over the hole to ensure that circulating air didn't cool down the sensor. ...
I should clarify that it's possible, given size and lack of insulation, that 80kW could be right, but not 25kW. For me this is the red flag that unde...
Yes, or not properly pushed into the pocket on the side of the cylinder.
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I am not sure by what logic you have reached ...
By JamesPa , 5 minutes ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@lizzie Thank you, very interesting and useful informat...
By Toodles , 19 minutes ago
-
RE: Mitsubishi Ecodan FTC6 settings
It sounds for your particular use case, yes, onboard cu...
By F1p , 27 minutes ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 3 hours ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 4 hours ago
-
RE: Is it the house or the equipment?
- Comfort and silence (for heating) - Heat storage wi...
By bobflux , 5 hours ago
-
RE: Advice on Vaillant Sensocomfort
Oops, I meant Sensocomfort (the UI to the controls)
By Batpred , 5 hours ago
-
RE: Heat Pump Training vs. Real-World Installation
Our instal was very much the opposite. White haired blo...
By Batpred , 5 hours ago
-
RE: Flushing system, cleaning and inhibitor
While skim reading a manual for our Vaillant HW tank, I...
By Batpred , 6 hours ago
-
Of course, what do you expect, human beings are human b...
By JamesPa , 6 hours ago
-
RE: 'Chinese Diesel Heater' to heat the home .....
Old thread but I'm new to the forum so new to me. How...
By BlizzardGreen , 23 hours ago
-
I'm not sure why you would want to make it more difficu...
By JamesPa , 1 day ago
-
RE: Wood burner with ASHP - direct air?
@lucia FWIW installed a woodburner some years ago. ...
By JamesPa , 1 day ago
SPONSORS
