Activity
 
Notifications
Clear all
JamesPa
@jamespa
Moderator
Illustrious Member
Joined: Apr 3, 2023
Last seen: Sep 15, 2025
Topics: 17 / Replies: 2855
Reply
RE: Heat Pump, DHW, UFH and Radiator Install

@bontwoody I can see 3 motorized valves but cant quite work out how one of them (which is on the pipework to the cylinder) is connected. I also dont ...

10 months ago
Reply
RE: In general - are shorter hotter cycles more costly or longer cooler cycles?

In purely theoretical terms the cooler the flow temperature the more efficient the heat pump is at delivering any given amount of energy, so longer an...

10 months ago
Reply
RE: Installing a heat pump in a Grade II listed property

@toodles, @cathoderay There is clearly a difference is air intake sensor reading between when the heat pump is on and when its off, with the value ...

10 months ago
Reply
RE: Shutting down heating when out for the day - data

I'm always somewhat cautious when claims are made of 30% saving in energy use by turning off/down the heating for part of the day. I'm not for a mome...

10 months ago
Reply
RE: New heat pump (Vaillant Arotherm + 7kW) performing better than installers expected?

Heat loss surveys are at best a reasonable estimate and at worst total nonsense. Although the science on which they are based is sound, there are too ...

10 months ago
Reply
RE: Avoid the Heat Pump Villain: Why Low-Loss Headers and Buffers Can Sabotage Your Heat Pump's Efficiency

This a matter of law not an MCS decision or even guidance. End of unless you want to apply for planning permission. You mention it's a Va...

11 months ago
Reply
RE: LG Therma V outdoor temp sensor

The sensor should really be outside in the shade, not inside the unit or in sun. Assuming it's separate (some ashps only have sensors in the air inta...

11 months ago
Reply
RE: Grant 13kW Aerona3 - issues getting zones to temp

@crimson In answer to the question no, unless the lockshield is behaving oddly which will wouldn't rule out. Does turning it back up reduce the te...

11 months ago
Reply
RE: Avoid the Heat Pump Villain: Why Low-Loss Headers and Buffers Can Sabotage Your Heat Pump's Efficiency

Check whether by 'buffer' they mean 2port volumiser (the key feature being 2 port). That's ok. It's typically 20-50l.. Vaillant do put a volumiser ...

11 months ago
Page 143 / 240
Share:

Join Us!

Latest Posts

Members Online

 No online members at the moment

Click to access the login or register cheese
x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO