Last seen: Aug 13, 2025
This is correct. Inverter limits protect grid and internal wiring. Depends on your tarrif. For me it makes sense to heat dhw at night at 6.7p/kWh...
Looking at those photos I agree with @ashp-bobba. To put it another way it looks like its targeting a DHW temp of 40 not 50, which means that it wil...
There are DHW tanks with a built in heat pump that take their intake from the house, the outside world or the loft. Sometimes these are described as ...
By manual I meant constant/DHW priority, ie it should reheat once the temperature drops below (target - hysterisis). Are you certain (a) the unit has...
If it heats reliably when triggered from melcloud it points more to a control misconfiguration than to anything physical. Holiday mode, selecting m...
If the thermostat is connected to the call for heat terminal on the vaillant or myson then I suspect it's also a call for cool (IE an 'enable'). If y...
Good luck. Missing rads definitely was a problem for me. The fancoil was supposedly on 3 month delivery (but actually turned up 4 days later!) and t...
Yeah, mine did exactly the same - no error codes. The turn on/off again suggestion was (sensibly) made by my installer before he turned up - might as...
Same here as above. Where have you seen this terminology?
Mine (Vaillant) recently did something very similar, basically heating DHW for a short while after a reset, then giving up. It was accompanied by var...
- 26 Forums
- 2,129 Topics
- 46.8 K Posts
- 23 Online
- 5,654 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Who has a V2G EV installation
General comment on battery care... I guess if ev is on ...
By Tim441 , 11 minutes ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@old_scientist I have never cleaned the mag filter myse...
By Toodles , 22 minutes ago
-
@old_scientist like for like comparisons are almost imp...
By Tim441 , 25 minutes ago
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist There is an option in the Tesla app that...
By Toodles , 48 minutes ago
-
RE: Mitsu Wireless Controller and MelCloud
On the FTC5 I think this requires the dip switch on the...
By Abernyte , 57 minutes ago
-
RE: ASHP heat output monitoring
@carlo I have a 16kw LG Therma V. Installed 2020 so eve...
By Tim441 , 4 hours ago
-
RE: Octopus Cosy & Octopus EV + bidirectional smart tariff, together. What, eh?
@old_scientist me too. Just installed my new heat pump ...
By Eliuccio , 2 days ago
-
RE: Is your heat pump insured?
Yup just spoke to Privilege to inform them of my impend...
By Scalextrix , 2 days ago
-
RE: Forum updates, announcements & issues
Just to keep everyone in the loop, as the site continue...
By Mars , 2 days ago
-
RE: Fast DHW setting on Midea (Clivet) heat pump
@simon-w, is this something you could potentially assis...
By Mars , 3 days ago
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
Fwiw I called my installer out for the first time a few...
By JamesPa , 3 days ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
@sandy, I'll send Vaillant an email tomorrow and see if...
By Mars , 3 days ago
-
RE: Long term efficiency degradation
@jamespa yes as I thought thanks. We have a reaso...
By Scalextrix , 3 days ago
-
RE: Sunamp Thermino Heat Battery
@jamespa A few days after the installation had been com...
By Toodles , 4 days ago
-
RE: Planning Permission May 2025
Fair enough. I have read the legislation and MCS020a ...
By JamesPa , 6 days ago
-
RE: How do I choose a single room MVHR to prevent losing heat in my bathroom ?
An update on the Heatsava. It is the most difficult thi...
By heat-pump-newbie , 6 days ago
-
RE: Renewables & Heat Pumps in the News
this document extensively describes (in a non-blame, ne...
By Judith , 1 week ago
-
RE: Ecodan - Legionella Operation Time and Target Temperature
Once the white plastic cap is removed, my immersion loo...
By Old_Scientist , 1 week ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@dgclimatecontrol I don't know, but they were not happy...
By DavidAlgarve , 1 week ago
-
RE: Why do we need pressurised systems?
A good question @toodles. My old open thermal store and...
By AllyFish , 1 week ago