Last seen: Oct 16, 2024
I’m another who has their heat pump on that site. I’m a big fan. It’s the 11kw Farnham Daikin Altherma. I was on the OVO electrification of heat trial...
As you know @transparent, I am in one of those 742 homes and things didn’t go well for many us. I have provided plenty of feedback to them during the ...
@kev-m Thanks for the form. It does seem to tie in with what I'm experiencing. Cycling starts to increase at 4-5C outside temperature. The offici...
@heacol The system is a Daikin Altherma. Heating schedule is set in the main controller, I have 20.5C through 6am-10pm then set back to 19C over ni...
@derek-m I don’t have any thermostats other than the Daikin unit that allows modulating leaving water temperature, this can vary the LWT by a couple o...
@derek-m COP varied from 2.54 to 3.5 over the period assessed, average daily temp -2.8C to 11.5C, with compressor starts per hour of running 0.1 - ...
Some of these frost valves are not supposed to be insulated. The Caleffi ones aren’t, but the inta ones can be. I only just found this out via another...
We have a Daikin Altherma. It’s doesn’t tell you a COP value. The info it can display is heat energy generated for hot water and heating. It also rath...
@derek-m This is the way I have my EV and battery set up to match the Octopus Go window. Neither are ‘clever’ enough to interact with external tri...
@transparent thanks for sharing the additional details about the batteries. In terms of price, I’m not looking to make a profit, so £1800 would cov...
Hi All Not sure if this counts as advertising, as I’m a private individual but I’m sure the moderators can deal with this if needed. I ordered 16...
- 26 Forums
- 2,102 Topics
- 46.2 K Posts
- 70 Online
- 3,388 Members
Join Us!
Latest Posts
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
@skyefarmer great you located the source of the issue a...
By Mars , 1 hour ago
-
RE: Location of hot water isolation valve on cylinder
@rossowheels if you isolate the water supply in it will...
By ASHP-BOBBA , 10 hours ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
From what you say about the radiators upstairs it does ...
By JamesPa , 16 hours ago
-
The Importance of Radiator Balancing for Efficient Heating: Introducing the Flow Regulating Valve
It’s fascinating to watch how low-temperature heating i...
By Mars , 19 hours ago
-
@heacol, if you're around, can you please provide some ...
By Mars , 22 hours ago
-
RE: Servicing Hitachi HP in rural Somerset
I'd give GreenGenUK a call or email them: sales@greenge...
By Mars , 22 hours ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 1 day ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 1 day ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 2 days ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 2 days ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 2 days ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 3 days ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 3 days ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 4 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 4 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 5 days ago