Last seen: Oct 9, 2025
@rann1888 - welcome to the forum. I have a fairly similar machine to yours. Its a bit confusing sometimes as to which FTC one has because at times the...
@hr_3 Mine does fluctuate too. Perhaps not by as much as yours though. That said, when it is operating, it seems to be at target pressure. Its only wh...
I'm tempted to buy one of the remote units just to see if we can get the auto adaption working properly
Hi @Mike H.Welcome to the forum. I don't now have a similar property myself but I can say that our annual energy requirement was surveyed at 13,000kwh...
That does seem high levels of usage. To compare, we used about 50kwh on 28th Nov (yesterday) - which is c. £12 in money too - but we are heating a 6 b...
40Kwh here yesterday (Nottingham) - CH only
@Kev-M - I am pretty sure that within the service settings of the FTC there is one for adjusting the thermistors, which I presumed to be to allow for ...
I will give it a go as we have a very similar system....just need to get my head around Derek's sophisticated spreadsheet!
@derek-m I am fairly pleased with a CH COP of 3.7 under this new 'weather compensation' approach. I looked at last year's data, when the ASHP was rely...
On weather compensation, that is what I currently have running and it seems to be coping well so far but as you say, we haven't really been tested (ye...
I agree with @batalto - your KWh figures @peterr look like they could be delivered rather than consumed. For comparison, mine is about 300kwh consumed...
Hi Peter. Welcome to the forum. I too have a the Ecodan but the 14kw. Can I ask, do you have the package with the pre-plumbed cylinder?
- 26 Forums
- 2,406 Topics
- 54.6 K Posts
- 364 Online
- 6,092 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Experience - New Build / Complete New Heating System
@jamespa I would wholeheartedly agree with you. In al...
By vincro , 1 minute ago
-
RE: Heat loss based on gas usage
In a word yes. Measurements based on a sing...
By JamesPa , 8 minutes ago
-
RE: Heat pump not reaching flow temperature
I would describe this as either a fault or a configurat...
By JamesPa , 30 minutes ago
-
RE: I’m glad the cold spell is over!
Thanks for the update, @judith. Cold spells with heat p...
By Mars , 35 minutes ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
@johnbroome As I say I think you probably have a fau...
By JamesPa , 1 hour ago
-
RE: Solis inverters S6-EH1P: pros and cons and battery options
@batpred I started reading this thread thinking I would...
By Hook , 2 hours ago
-
RE: Please help with the settings ecodan
@sheriff-fatman when I increase it to number 3, the ...
By nose1972 , 2 hours ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
So far as i can see no because its NOT connected to the...
By JamesPa , 2 hours ago
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
I forgot to mention: Octopus measured our heat loss at ...
By Toodles , 4 hours ago
-
RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP
Thanks Mars and thank you for reaching out to so many p...
By iotum , 4 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: @davec Manufacturer: Peak Energy Mode...
By DaveC , 4 hours ago
-
RE: Rate the quality of your heat pump design and installation
Well, the guy came out, turned the heat pump to max, we...
By razz , 4 hours ago
-
Midea R32 setup and bizarre running with lengthy off periods?
Hi I am new to the world of ASHP and have just had a re...
By Countryman Helmsley , 4 hours ago
-
RE: Setback savings - fact or fiction?
Given the weather has been relatively stable, the empir...
By Batpred , 5 hours ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@editor That is very kind! Thank you so much.
By johnbroome , 6 hours ago
-
RE: ASHP Energy Consumption: Aira 12kW heat pump
@wally Hi I am not sure how large your house is b...
By TechnoGeek , 7 hours ago
-
RE: Predicted Heat Loss & Needs from MCS calcs vs EPC vs actual
I've been thinking along similar lines to @tim441 from ...
By Sheriff Fatman , 7 hours ago
-
Thanks, @technogeek. Good to hear about the accuracy. ...
By Majordennisbloodnok , 8 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
In my case it was a very specific pattern of behaviour ...
By Sheriff Fatman , 8 hours ago
-
RE: Vaillant aroTherm not heating with many faults
@ashp-bobba Yeah I'll give it a go, will check filter...
By Anon67 , 8 hours ago


