Last seen: Aug 4, 2025
@toodles Spot on, mostly from installers therefore end users, someone has to pay for it. However, that is only a very small part of the cost. I ran ...
@bontwoody That flow temperature is pretty close to 45 Deg C (43 deg C), it could be sensor drift that is causing the activation, it is clear that it ...
MCS and Heat Geek are not the same thing. MCS is a standard that any Heat Geek, or any other installer, has to abide by. It is not an installation sta...
@ecobaker They work reasonably well on open zone, just make sure you always have the minimum flow rate. Attached is a manual with the open zone prog...
@toodles The Heat Geek brand is just that, a commercial, moneymaking brand.
@editor It is a physical and practical impossibility to balance a buffer in all instances and with varying loads, flow rates, temperatures and compres...
@nicholab I am not sure I understand what you have said, are you saying that the contract they gave you said it would be expensive to run? That back...
@nicholab According to your oil usage, you are using about 12000 Kw house per year, according to the EPC (which will be woefully inaccurate) you will ...
@neilhighland Have a look at the Panasonic T cap, a little more expensive but a far superior unit. You get what you pay for.
Sorry to be the bearer of bad news, your system is designed for a high temperature heat source, back boiler, on-off old type gas or oil boiler or biom...
@crimson Unfortunately unless you change the installation, anything you do will have little effect on the performance of the system. Heating systems a...
- 26 Forums
- 2,123 Topics
- 46.7 K Posts
- 55 Online
- 4,531 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Octopus Cosy & Octopus EV + bidirectional smart tariff, together. What, eh?
I've certainly seen that on their Ts & Cs page but ...
By Majordennisbloodnok , 18 hours ago
-
RE: Planning Permission May 2025
Where does it state this please? Im genuinely interest...
By JamesPa , 21 hours ago
-
RE: ASHP heat output monitoring
@carlo - not much better, is it. It looks more like a u...
By cathodeRay , 23 hours ago
-
RE: Renewables & Heat Pumps in the News
this document extensively describes (in a non-blame, ne...
By Judith , 1 day ago
-
RE: Ecodan - Legionella Operation Time and Target Temperature
Once the white plastic cap is removed, my immersion loo...
By Old_Scientist , 2 days ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@dgclimatecontrol I don't know, but they were not happy...
By DavidAlgarve , 2 days ago
-
RE: Why do we need pressurised systems?
A good question @toodles. My old open thermal store and...
By AllyFish , 2 days ago
-
RE: 300 Liter Tank - Do I have to heat it all?
Cross references for @martingale Background discussi...
By Transparent , 3 days ago
-
@ecobaker May I ask a question of you please. I too hav...
By Papahuhu , 3 days ago
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
@terry1812 Oh Good! Pleased to help if I can! Regards, ...
By Toodles , 3 days ago
-
It's unclear to me how the Smart Control project work b...
By Transparent , 3 days ago
-
RE: Have Consumers Been Lied to About the Efficiency of Heat Pumps Made in China?
@pavel, this isn't about discrediting Chinese products....
By Mars , 3 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
We had an excellent four months (11/3 to 15/7) generati...
By JulianC , 6 days ago
-
RE: Is this just haze or something more?
I think the present somewhat cooler hazy days show the ...
By Judith , 6 days ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
All noted and accepted and as I say I am sorry that you...
By JamesPa , 6 days ago
-
I think it is very much me that is sitting outside the ...
By Grantmethestrength , 6 days ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 7 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 1 week ago