Last seen: Mar 17, 2025
Hello again all, So our system had been running for a few weeks as described above. The other morning I heard the unit running for a very long tim...
Hi Andy, I know my controller shows two different curves. As I mention above we have UFH downstairs and Rads upstairs. Couldn't tell you how it ad...
Hi Alec, Thanks for the reply. Sorry, everything is Vaillant apart from the UFH central unit, and the room stats down stairs. Slowly getting th...
@saz Ill give them a bell and see what they say. In the mean time it has been changed, lets see what happens. On another forum it was mentioned that...
Happy Sunday all, Quick update to our setup. I have replaced all the 18 year old Drayton RTS 1 UFH controllers for Neostat V2 units. They not o...
@transparent Hi there. We are lucky are in some ways where we live, we have unusually high amounts of good light here which will definitely help w...
@saz It is an aroTHERM plus according to the label. VWL 75/6 A 230V S2
hi @saz We do have one of these When I mention master unit(not sure in the terminology is correct) but we have a VR720F This is what I mean....
Hi @saz, There are indeed two units. The downstairs one is the master that does all the controlling, the second unit is a slave that allows us to c...
Hi there, The unit is a 7kW unit, fitted on the north facing rear of the house. I have started tweaking already. Reduced the curve from 0.8 downst...
Latest Posts
-
RE: Recommended home battery inverters + regulatory matters - help requested
This is what the Solis Engineers sent me about earthing...
By Batpred , 12 minutes ago
-
RE: Power outages and storms: A surprisingly good DNO experience
To be fair, the interactions I’ve been having recently ...
By Majordennisbloodnok , 21 minutes ago
-
RE: Setback savings - fact or fiction?
As far as I am aware, the majority, if not all, of the ...
By cathodeRay , 2 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
Fair point. The highest frequency of defrosts I'd seen...
By Sheriff Fatman , 13 hours ago
-
RE: Heatpunk Floor plan issues
It's usually the complete opposite... seldom that Safar...
By Mars , 13 hours ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@mike-patrick interesting update - thanks.I've been thr...
By Tim441 , 14 hours ago
-
RE: Fan is clipping ice build up from the front of unit.
@majordennisbloodnok I’ll not go there thanks! Toodles.
By Toodles , 16 hours ago
-
RE: Running from backup generaor in powercut?
@majordennisbloodnok Back in the 80’ or 90’ we had a te...
By Toodles , 16 hours ago
-
RE: Running my new Nibe ASHP efficiently
I'm new to the forum. Did you get a reply to this last ...
By Mike @ Camelot , 17 hours ago
-
RE: ASHP Energy Consumption: Aira 12kW heat pump
@grantmethestrength MCS requirements for DHW capacity h...
By Toodles , 18 hours ago
-
RE: New Mitsubishi Ecodan 11.2kW installation - L9 errors and maybe more
Great to hear! I just figured this out a day or tw...
By anotherdaveuk , 19 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
@adamk I'm observing my own system at low temperatures ...
By dr_dongle , 24 hours ago
-
RE: Free Ecoheat Heat Pump Install
@deltona Yes older houses are problematic like that, bu...
By bontwoody , 2 days ago
-
RE: Radiator sizing sanity check
As I mentioned early on the cost of supplying and fitti...
By JamesPa , 2 days ago
-
RE: Electricity price predictions
Great point, one of the key ones in my chat with Octopu...
By Batpred , 2 days ago
-
RE: New Fogstar 15.5kWh upright solution
Let me point out that there are many Chinese suppliers ...
By Transparent , 3 days ago
-
RE: Weather compensation- why you should use it
@majordennisbloodnok — The Two Ronnies Mastermind sketc...
By cathodeRay , 3 days ago
-
Just realised that this image of the cylinder cupboard ...
By Sheriff Fatman , 3 days ago
-
RE: Rodents! A word of warning for heat pump owners
Two thoughts: 1: Let's ask @david-s if Primary Pro in...
By Transparent , 3 days ago
