Last seen: Sep 19, 2024
I knocked up a modelling tool for your system today and it shows the following results based upon the data you supplied. The results would indicate ...
@ericdo Out of interest, what kind of heating boilers do your neighbours have and how noisy are they?
I suspect that your heatmiser's are starting and stopping your heat pump, and that either heatmiser being on will request the heat pump to start, but ...
If you haven't already done so, I would suggest balancing your system.
@gotaashp It is a pity the chart doesn't include IAT and OAT.
Did your installer balance your system?
Maximum electrical energy reduction would require setback to be performed during the lowest OAT, with slow recovery being carried out during the highe...
@newhouse87 As you say, 'no two homes are the same'. As CathodeRay will delight in saying 'you can model to your hearts content, but you cannot be...
Based upon modelling, and the Laws of Physics and Thermodynamics, reducing the Indoor Air Temperature (IAT) will indeed reduce heat loss, which in tur...
Sorry about that, it is one of the pleasures of being old and decrepit. 🙁 I will do some calculation tomorrow.
@kev-m One thing I notice is that in milder temperatures my LWT doesn't vary much. Is that because the WC curve flattens, or the change in thermal...
What I find surprising is that you need to run at such high LWT in mild weather conditions. What is your heat loss calculation and heat emitter capaci...
Latest Posts
-
RE: Testing new controls/monitoring for Midea Clone ASHP
I agree, the video lacks context and detail, and the Mi...
By cathodeRay , 38 minutes ago
-
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank
@heacol maybe you can figure why mines vibrating the pr...
By AdamK , 48 minutes ago
-
RE: Powerwall 3 or Myenergi or something else?
@adamk what you need is enough battery size to cover 3 ...
By Judith , 58 minutes ago
-
-
RE: Say hello and introduce yourself
@jarlatheoin do put the MVHR in early it’s not an easy ...
By Judith , 1 hour ago
-
RE: How to Zone with a Single Room with UFH
We have exactly what you describe, one utility room wit...
By Judith , 2 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@agentgeorge Come the Ist of October, the Cosy cheapest...
By Toodles , 3 hours ago
-
RE: Boxt Heat Pump Installation Experience
@ashfp Mine does have a buffer tank. That was my experi...
By Andrew J H , 14 hours ago
-
RE: Which temperature sensor for a Steibel buffer and Ecodan?
@ashp-bobba might be able to help as an Ecodan expert.
By Mars , 1 day ago
-
RE: Help me keep the faith with my air source heat pump installation
I'm sure you are right, I was just trying to understand...
By JamesPa , 1 day ago
-
RE: Preparing for 2nd winter in new build house.
Yuch! So that's basically just an on/off control. I...
By Transparent , 2 days ago
-
Good day everyone. I'm new here and have a few question...
By Edin67 , 2 days ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 3 days ago
-
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 3 days ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 5 days ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 5 days ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 5 days ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 5 days ago
