Last seen: Sep 19, 2024
@cathoderay Minute by minute actual OAT data is required so as to compare this to your Midea OAT data, averaged data is of no use. The reason I am...
@cathoderay If you still wish to have an independent OAT sensor, you could consider coating an MD02 with circuit board lacquer and then putting it w...
I may have suggested trying a fixed LWT for a period of time to stabilse the system, in a similar manner to switching a swinging industrial control sy...
What I am suggesting is to not have a setback, but keep your AA system, since this should automatically request the lowest LWT that meets demand whils...
Running the heat pump constantly at lower LWT, should help reduce the cycling and defrosting, until you can do something to alleviate the 'cold well' ...
Have you resolved your problem? Feedback is always welcome.
Have you resolved your problem? Feedback is always welcome.
@cathoderay I think that you will find that the cycling is most likely due to the 'cold well' effect, which appears to be shown by the raw data. W...
Excellent data once more. It would be interesting to see how the OAT value on the chart compares with OAT readings from local weather stations.
I'm afraid that I don't have details concerning the AA algorithms, but a normal industrial type control system would probably react in the same manner...
Thanks Kev, no rush. Could you also please add the RWT values so that I can ascertain when the compressor is running.
@kev-m Hi Kev. I'm going to run the raw data that you kindly supplied, but I need to set the initial conditions for your system. Could you please ...
Latest Posts
-
RE: ASHP heat output monitoring
I installed the heat pump in December '24, so the data ...
By Carlo , 13 hours ago
-
There are some projects looking at how smart meters and...
By Jeff , 19 hours ago
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
@terry1812 Yes, I use Homely, as to whether Daikin is u...
By Toodles , 1 day ago
-
RE: Why do we need pressurised systems?
@old_scientist If that were the case (and it might well...
By Toodles , 2 days ago
-
RE: 300 Liter Tank - Do I have to heat it all?
There’s no second hand market for DHW tanks (I was told...
By Judith , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
We had an excellent four months (11/3 to 15/7) generati...
By JulianC , 2 days ago
-
RE: Is this just haze or something more?
I think the present somewhat cooler hazy days show the ...
By Judith , 3 days ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
All noted and accepted and as I say I am sorry that you...
By JamesPa , 3 days ago
-
I think it is very much me that is sitting outside the ...
By Grantmethestrength , 3 days ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 4 days ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 4 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 4 days ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 4 days ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 4 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 5 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 5 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 5 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
I would deffo install an additional slinky run, especia...
By Transparent , 6 days ago
