Last seen: Sep 19, 2024
If you would care to provide the minute by minute raw data for last nights chart, I will run it through the Modeling Tool as see if it predicts that c...
@cathoderay I would state that last nights cycling was due to the weather being milder, hence the heat demand was below the minimum output of the he...
@cathoderay What was the operating mode of the heat pump?
I will make one final attempt. But your heat pump controller does know the true OAT shortly after it has stopped running, the problem being that it ...
It means that I don't have a problem if you wish to keep going round in circles.
The WC curve needs to match the heat loss of your home. What is the heat loss calculation? When heating the hot water cylinder, the heat pump increa...
@cathoderay No problem.
What are the settings of the Weather Compensation (WC) curve?
Okay, time to go back to basics. What is the size and type of your home? What is the heat loss calculation for your home? What is the output capacit...
That is the reason why I suggested putting the system in fixed LWT mode for a period of time, it is similar to putting an auto control system into man...
@cathoderay What is the 'source' of the Set LWT reading? Is it read from the Midea controller? I wonder if the controller waits until the LWT has ...
So you are the culprit behind NG (or whatever they are called, or going to be called) having to carryout such excessive upgrades. 😋
- 26 Forums
- 2,364 Topics
- 53.6 K Posts
- 213 Online
- 6,029 Members
Join Us!
Worth Watching
Latest Posts
-
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
@kevh it's worth remembering that many lsvs only actual...
By JamesPa , 12 hours ago
-
@majordennisbloodnok Education, Education, Education…
By Toodles , 15 hours ago
-
RE: Setback savings - fact or fiction?
Exactly. We only need to compare conditions, to decide ...
By cathodeRay , 18 hours ago
-
RE: Balancing financial efficiency and comfort using the Octopus Cosy tariff
I found because I have very low heat loss I can set bac...
By RadWhisperer , 21 hours ago
-
RE: Need Help Optimising My Rushed ECO4 Install: 12kW Bosch Heat Pump
Welcome @mickamills We too have an oversized 12kW Sa...
By Old_Scientist , 1 day ago
-
RE: My Powerwall 3 Consumes 3-4 kWh/Day in Self-Consumption: Is This Normal?
@caron I can confirm that the power usage of the PW3 is...
By Old_Scientist , 1 day ago
-
RE: Speedcomfort radiator fans
Thats true, but having tried (and succeeded) in constru...
By JamesPa , 1 day ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
@bash brilliant, thanks for the feedback
By energy9165 , 1 day ago
-
RE: Heat Pump Heats the House… But It’s Not Cosy. Emitter Changes or System Tweak?
@alastair There I was, feeling grumpy, he said “Cheer u...
By Toodles , 1 day ago
-
RE: Grant Aerona: Is there a setting to keep the 2-port valve open during pump blockade
Depends on OAT. Mine cycles at OAT>10 and of course...
By JamesPa , 2 days ago
-
RE: New Fogstar 15.5kWh upright solution
@transparent My conclusion is as you have noted, tha...
By Bash , 2 days ago
-
RE: Mitsubishi Ecodan R290 10kW performance
And to you too. Wishing you a very enjoyable festive s...
By Sheriff Fatman , 2 days ago
-
RE: External pipework insulation
They do? But that isn't apparent from the photos we'r...
By Transparent , 2 days ago
-
RE: Say hello and introduce yourself
@velcro welcome to the forums. Please feel free start a...
By Mars , 2 days ago
-
Daikin EDLA11D3V3 DHW Settings
I have a newly installed EDLA11D3V3 which I'm still get...
By Velcro , 2 days ago
-
RE: Midea ASHP – how to set weather compensation
@curlykatie did you get sorted with this?
By MickaMills , 2 days ago
-
RE: MyVaillant Connect Regular Disconnect
Thanks. Yes, if the time is consistently 11pm every nig...
By buckwem , 3 days ago


