Last seen: Sep 19, 2024
@cathoderay Thank you for providing a redacted copy of the raw data, I am always amazed at how trusting humans can be. Without giving away any sta...
@cathoderay One further item I forgot to add to the list. Can you provide details of the probable concentration of anti-freeze within your system,...
@chickenbig So what is the half-life of a coder? 😋 When can they be deemed safe to handle? 🙄 🙄
I fully agree with your sentiments on this subject. I for one would be prepared to be more involved in guiding the decision makers for the benefit o...
Sorry, don't know what oil they may be referencing.
If the IAT fell from your desired 19C, to 13.1C and remained at that value for the full 6 hour setback period, then increased back to 19C, then I ful...
@cathoderay Like you, I prefer to keep the maths as simple as possible, so to take the US example and apply it to your situation. If a temperature...
@marzipan71 The first thing that I would suggest is repeating the temperature measurements using an actual thermometer, since even if there is no ac...
@cathoderay A 8 degree F change in temperature is equivalent to a 4.44C temperature change, which for 8 hours would have the same affect as a 1.48C ...
@cathoderay A 1C reduction in IAT from 19.2C to 18.2C would provide a predicted 10.94% decrease in electrical energy consumption using the variables...
Latest Posts
-
RE: Do I just go with the lowest quote for my heat pump?
I’m hoping for a bit of help. The system is an Octo...
By Jancold , 23 minutes ago
-
Updated Data on Dimplex Edal 270L ASHP Hot water tank 1 year full data. Scottish Highlands
I replaced my oil burning boiler that did hot water and...
By Bob@Lochinver , 1 hour ago
-
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank
@adamk &@editor I think these FRVs come into their ...
By Judith , 2 hours ago
-
RE: Which temperature sensor for a Steibel buffer and Ecodan?
@ashp-bobba many thanks for the information. I have f...
By downfield , 3 hours ago
-
@judith Applied for replacement from installer. If...
By cliffhanger , 4 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
The real answer is trial and error, because there are a...
By cathodeRay , 5 hours ago
-
@drei Id be wary of the reference in quote 1 to reattac...
By benson , 19 hours ago
-
RE: Renewable Heating Hub WhatsApp Channel
I clicked on the link and have WhatsApp on the computer...
By dgclimatecontrol , 20 hours ago
-
RE: Say hello and introduce yourself
Thanks for the warm welcome @editor and can't wait to b...
By Pirate Rich , 22 hours ago
-
RE: Powerwall 3 or Myenergi or something else?
Let's also bear in mind that Fogstar supply more than o...
By Majordennisbloodnok , 1 day ago
-
RE: How to choose Towel Rails for an ASHP
@judith Yes I agree. They are extremely expensive. ...
By GrahamF , 1 day ago
-
Riello NXHM Monobloc Air Source Heat Pump
Hi, does anyone have any feedback on Riello NXHM Monobl...
By dgarvey , 2 days ago
-
RE: How to Zone with a Single Room with UFH
We have exactly what you describe, one utility room wit...
By Judith , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@agentgeorge Come the Ist of October, the Cosy cheapest...
By Toodles , 2 days ago
-
RE: Boxt Heat Pump Installation Experience
@ashfp Mine does have a buffer tank. That was my experi...
By Andrew J H , 3 days ago
-
RE: Help me keep the faith with my air source heat pump installation
I'm sure you are right, I was just trying to understand...
By JamesPa , 3 days ago
-
RE: Preparing for 2nd winter in new build house.
Yuch! So that's basically just an on/off control. I...
By Transparent , 4 days ago
-
Good day everyone. I'm new here and have a few question...
By Edin67 , 4 days ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 5 days ago
