Last seen: Sep 19, 2024
Part of the FIT agreement states that any changes to the system must be declared and approved. Since the FIT scheme stopped taking new applicants quit...
You are more than welcome. I prefer to work through problems in a systematic and logical manner, particularly when the person seeking help is new to ...
@myanthony It would appear that Hugh wishes to help, so rather than have too many 'cooks', I will leave you in his capable hands. Best of luck in ...
There would appear to be two electrically operated valves, is that correct? Does the flow pipe from the heat pump connect between these two valves?
@myanthony The pipe with the isolation valve with the blue handle, to what equipment does the pipe connect?
@myanthony The 'Y' strainer is not that large and could have been lagged over. If you feel along the insulation for any bumps, or if you find anythi...
@myanthony The 'Y' strainer should be in the return pipework probably just through the wall inside your home.
@myanthony Looking at the photos I was surprised to see that it has been mounted on wall brackets, which does not comply with the manufacturers inst...
@myanthony According to the manual a 'Y' strainer should have been installed, probably in the return pipework back to the heat pump. If you are not ...
Are you intending to help, in which case I will leave it to you to resolve the problems?
@myanthony Do you have a copy of the manual HughF posted? If so, could you provide a photo of the main screen display as shown on page 10 of the man...
Could you please provide some photo's of the equipment inside your home?
Latest Posts
-
RE: Midea ASHP – how to set weather compensation
@pash44pump Referring to the problem of rooms with diff...
By Tasos , 58 minutes ago
-
RE: Help me keep the faith with my air source heat pump installation
Er true, it should have read l/hr!
By JamesPa , 2 hours ago
-
RE: Big Changes Coming to Our Heat Pump System
@old_scientist, our system was royally bodged six years...
By Mars , 2 hours ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
@scalextrix You're assuming that the source of the comm...
By Transparent , 2 hours ago
-
@jamespa thanks, I appreciate the offer. For n...
By DREI , 16 hours ago
-
RE: Who’s Caved and Switched the Heating On Already?
I have 3 women in the house, 2 little ones, so my heati...
By DREI , 21 hours ago
-
@damon thanks. I will do as you suggest. Hopefully I wi...
By bontwoody , 22 hours ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 2 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@dgclimatecontrol I attach the responses from 2 potenti...
By pash44pump , 2 days ago
-
RE: Buffers, hot water and cooling
@dgclimatecontrol thanks, that's helpful.
By JamesPa , 3 days ago
-
RE: Failing heat pump system - seeking thoughts on a rebuild
I realise im overdue an update on my situation. first...
By Cleardene-ashp , 3 days ago
-
RE: Replacing Worcester oil boiler with an ASHP
@toodles thanks. I was told by the engineer that this h...
By JulianC , 3 days ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
A week later, I'm finally picking up this comment... ...
By Transparent , 3 days ago
-
RE: COP is not the only measure of efficiency
We keep all our TRVs fully open using the whole house a...
By Old_Scientist , 3 days ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
I am pleased to say at 4pm today we have added another ...
By ASHP-BOBBA , 4 days ago
-
RE: Renewables & Heat Pumps in the News
To unpack this a little.... 1) how many of us in this...
By Lucia , 4 days ago
-
RE: Vaillant aroTherm Plus 10kW thoughts?
@realevil the fans and fan speed / coil size (height, w...
By ASHP-BOBBA , 5 days ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
@morgan this can just be done by your sepecilist when t...
By ASHP-BOBBA , 5 days ago
-
RE: Anyone still weathering it out with Agile?
@toodles I guess it all comes down to import averages. ...
By Tim441 , 5 days ago
