Last seen: Sep 19, 2024
Hi @marknhudson Please press the F1 button and let me know what the displayed temperatures are reading.
Wow, they are really trying to corner the market with that tariff. 😮
Hi Mark, Do you know how your system is being controlled? Do you have thermostats and TRV's? Is the FTC controller set for weather compensation cont...
Hi Hydros, If the indoor temperature is being maintained, then the radiators are emitting sufficient heat energy, even at lower water flow temperatu...
Hi @sand Actually I had forgotten that Mark also has a 2 zone system, so following his advice would probably be the easiest option for the present....
Hi @peter Thanks for the update. It may be that you do not need to adjust the weather compensation, since auto adaptation should compensate for any...
Hi sand, I'm afraid those are difficult questions to answer, since it very much depends upon how your system has been wired and configured. I will...
Hi @peter Did you move the remote controller into your living area? Did you make the suggested changes? If you do not provide feedback then it li...
Hi Hr_3, As you have suggested, I would recommend changing the weather compensation curve from 1.0 to 0.8. Then use the Comfort Level setting to ach...
Hi Kev, If you press F1 more than once, are there any additional screens?
Hi Kenian, If you are operating on weather compensation, then where is the 45C value coming from? Could you post a photo of your controller? Do yo...
Hi @editor Whilst the relevant manuals can be located and downloaded, I'm afraid that the ones for the LG equipment leave a lot to be desired. In m...
Latest Posts
-
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank
ok my setup is pretty simple: 7.35kw cibse heat loss ...
By AdamK , 1 hour ago
-
RE: How to choose Towel Rails for an ASHP
In one en-suite bathroom we have a 180cm high towel rai...
By Judith , 2 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
This is actually based on the same chipset as the Svena...
By Grantmethestrength , 3 hours ago
-
RE: Powerwall 3 or Myenergi or something else?
@adamk what you need is enough battery size to cover 3 ...
By Judith , 9 hours ago
-
-
RE: Say hello and introduce yourself
@jarlatheoin do put the MVHR in early it’s not an easy ...
By Judith , 9 hours ago
-
RE: How to Zone with a Single Room with UFH
We have exactly what you describe, one utility room wit...
By Judith , 9 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@agentgeorge Come the Ist of October, the Cosy cheapest...
By Toodles , 10 hours ago
-
RE: Boxt Heat Pump Installation Experience
@ashfp Mine does have a buffer tank. That was my experi...
By Andrew J H , 22 hours ago
-
RE: Which temperature sensor for a Steibel buffer and Ecodan?
@ashp-bobba might be able to help as an Ecodan expert.
By Mars , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
I'm sure you are right, I was just trying to understand...
By JamesPa , 2 days ago
-
RE: Preparing for 2nd winter in new build house.
Yuch! So that's basically just an on/off control. I...
By Transparent , 2 days ago
-
Good day everyone. I'm new here and have a few question...
By Edin67 , 2 days ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 3 days ago
-
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 3 days ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 5 days ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 5 days ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 6 days ago
