Last seen: Sep 19, 2024
Welcome to the forum. I'm not certain on the best way to add monitoring, there may be others on the forum who can help. Please provide details of ...
@iancalderbank Thanks for the info Ian. So has the system not been piped up as we would assume, and the information from the Samsung flowmeter is ...
I was the one who said 'not recommended', which may have been a bad choice of words. I was trying to use words that would not cause utter panic, befor...
It is difficult to provide definitive suggestions, since I cannot watch your system operate and see how it responds under different operating conditio...
@iancalderbank I forgot about your final requirement. Slowly ramping up the LWT for DHW production is indeed a good idea. The only suggestion th...
@iancalderbank You are indeed correct, calculating the required LWT from the OAT reading is a simple mathematical formula. I would suggest that you ...
@riponowl I would be more inclined to believe the MMSP flowmeter rather than the Samsung one. Also check that the direction of flow is correct, th...
Also try the same test with the controller in fixed LWT mode.
Well done Ian. If you can actually write to the Target LWT register, and it retains the setting, then this would probably be easier than modifying t...
@riponowl Please provide details of the MMSP installed along with close-up photo's if possible.
How many water pumps do you have and where are they located? Close-up photo's may help.
Good point Ian.
- 26 Forums
- 2,171 Topics
- 47.8 K Posts
- 32 Online
- 5,744 Members
Join Us!
Podcast Picks
Latest Posts
-
@cliffhanger - seriously though, I have no idea. What I...
By cathodeRay , 1 hour ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 1 hour ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 3 hours ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 6 hours ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 9 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
I've never physically seen it, but I seem to recall som...
By cathodeRay , 9 hours ago
-
@jamespa Ours is a Daikin EDLA03 8 kW and the Delta T =...
By Toodles , 10 hours ago
-
RE: Big Changes Coming to Our Heat Pump System
Day one is done. The system’s been fully flushed and ...
By Mars , 1 day ago
-
RE: Midea ASHP – how to set weather compensation
I noticed that too and thought the same thing, but then...
By cathodeRay , 1 day ago
-
RE: Ya can’t win! It is S*d’s Law!
@old_scientist If IOF is still running next late spring...
By Toodles , 1 day ago
-
RE: Electricity price predictions
Those of you on Agile will do well tomorrow; there are ...
By Toodles , 1 day ago
-
RE: Who’s Caved and Switched the Heating On Already?
We've been running our Ecodan system, installed in June...
By Sheriff Fatman , 1 day ago
-
Ok. Two schools of thought. The first is to run the ...
By JamesPa , 2 days ago
-
@drei Willing as I am to help, I don't think I'm yet ...
By JamesPa , 2 days ago
-
Selling 5 year old ASHP & Gas Combi Boiler - £590
Selling a 5-year-old Daikin Altherma Hybrid Air Source ...
By Paul G , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Er true, it should have read l/hr!
By JamesPa , 2 days ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 4 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@dgclimatecontrol I attach the responses from 2 potenti...
By pash44pump , 4 days ago
-
RE: Buffers, hot water and cooling
@dgclimatecontrol thanks, that's helpful.
By JamesPa , 5 days ago