Last seen: May 2, 2025
@sandman1600 It’s tricky, if you run it in the 30s, it will cycle a lot. If you run it in the 40s, it will cost a bit more to run and you will have...
I think you’ve got a piped header , not a buffer. The called for temps are now low and you are cycling the machine. The fact that it’s cycling at te...
@sandman1600 Some good advice from James. On those charts there is good news and bad news. The good news it it only took 70Kw to heat your house...
@sandman1600 there is no chance your unit used 200 kw in a day….. what does your octopus app say?
Can you do it for one day. That Cop is a problem yes, the pump can’t deliver the heat at that low temp. The emitters / secondary flow is not big eno...
@jamespa Yep, in Mel cloud you’ll see energy consumed and delivered. What was yesterday?
@sandman1600 heat loss is heat loss. Yours is not anywhere near 14. My house is 263m2, built 150 years ago and I’ve the 11.2 ecodan. Insulation is ...
Those flow rates are very low for the 14kw unit. Youre currently only needing 3.5Kw to keep your house warm. One problem you may have is the emitte...
can you take a picture of the outdoor unit. Has it got 2 fans?
And the graphs above, one is a defrost. The other wobbly ones are unit at temp, but can’t give the heat out quite fast enough so adjusts up and down ...
Most installers I think want to do a good job. im struggling to getting head around a 14kw unit for a smallish bungalow that I can see insulation ha...
@sandman1600 does it have a finishing screed over it? do you know how to get the flow rate through the machine from the FT6 control panel? do y...
Latest Posts
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
OK, so the Daikin I believe by default adjusts flow rat...
By JamesPa , 10 minutes ago
-
RE: Why do we need pressurised systems?
@old_scientist If that were the case (and it might well...
By Toodles , 2 hours ago
-
OK... I'm here. But the amount of my time needed to add...
By Transparent , 5 hours ago
-
Hi, I'm a new member from Italy, with a new LG therma V...
By Carlo , 8 hours ago
-
RE: 300 Liter Tank - Do I have to heat it all?
There’s no second hand market for DHW tanks (I was told...
By Judith , 9 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
We had an excellent four months (11/3 to 15/7) generati...
By JulianC , 18 hours ago
-
RE: Is this just haze or something more?
I think the present somewhat cooler hazy days show the ...
By Judith , 23 hours ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
All noted and accepted and as I say I am sorry that you...
By JamesPa , 1 day ago
-
I think it is very much me that is sitting outside the ...
By Grantmethestrength , 1 day ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 2 days ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 2 days ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 3 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 4 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 4 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 4 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
I would deffo install an additional slinky run, especia...
By Transparent , 4 days ago
