Last seen: Dec 16, 2022
@hughf Thanks Hugh, is this the one I need to have turned fully clockwise @allyfish?
@allyfish Thanks Ally, so is your suggestion that the auto bypass should remain? (as this is the standard installation for Grant). I couldn't fi...
System seems to *hopefully* be settling down a little bit now. Thanks to everyone for all of your advice, especially @derek-m and @Allyfish it really ...
@MTN Just found the email from our original quote; The heat loss shows that your demand is too much for a 13kw unit, and you will need to have t...
@mtn Just thinking back to when we had this installed our heat loss was about 12-13kw, because we were really on the border of having the smaller 13kw...
@allyfish Really useful again, thanks! What size pump do you have and what is the Sqm yours is supplying? Over the weekend, prior to making the change...
@allyfish Thanks again! The secondary flow is on a timer too, it only come on each evening (when typically we'd be getting showered), so would this mi...
@allyfish Thank you for this, I appreciate such a detailed response and how much time this must have taken you! I've attached a picture of the low l...
@derek-m I'm allowed to post pics now so please see attached! This is based on a temperature in living areas of 21, this will be way too warm for us...
@derek-m Thanks Derek for the welcome! I'll do my best to answer the questions, but I'll give a bit more background info first as this might be useful...
Latest Posts
-
RE: Midea ASHP – how to set weather compensation
It is pretty awful, but from what I remember (I no long...
By cathodeRay , 5 minutes ago
-
RE: New build installation query
@jamespa I think you are right about a hotel type hot w...
By IaAck , 6 minutes ago
-
Grant Aerona 3 and Drayton system questions
Hi folks A newbie here who got a Grant Aeron...
By LabLover , 7 minutes ago
-
RE: Mitsubishi Ecodan R290 10kW performance
@ecoste From the graphs I wonder why its heating water ...
By dgclimatecontrol , 24 minutes ago
-
Thanks for the response @batpred Your conversational ...
By Transparent , 39 minutes ago
-
I've got melpump with the wifi adaptor plugged into the...
By davidnolan22 , 54 minutes ago
-
RE: Daikin Octopus installation update - I saw my first defrost. 😍😂
Thats encouraging. As I say normal motion in pipework ...
By JamesPa , 1 hour ago
-
RE: What should we do with our Aga?
One slightly off-the-wall suggestion is that, if you li...
By Majordennisbloodnok , 2 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
I think there may be some oddities about the COP report...
By JamesPa , 4 hours ago
-
RE: One room is colder than the rest of the house
I would personally be sceptical about reaching any conc...
By JamesPa , 15 hours ago
-
RE: My experience with 3 heat pump surveys: Heat Geek, British Gas & Octopus
If you paid for any of the assessments try asking for t...
By JamesPa , 16 hours ago
-
@drei Thats a nice designer radiator which it would ...
By JamesPa , 16 hours ago
-
I've created a separate post here, wondering about radi...
By DREI , 18 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@ecoste, @walnut-tree-cottage these are both great piec...
By JamesPa , 18 hours ago
-
RE: Solar inverters - where does the energy go when clipping?
You will, of course, check the dimensions and weight be...
By Transparent , 23 hours ago
-
RE: The Hidden Secret to a Successful Heat Pump: Pipe Size Matters
17l/min is enough for only 6kW at 5C DT, not surprising...
By JamesPa , 1 day ago
-
-
RE: End of Summer Time Reminder to Ecodan owners
As I understand it....ha....Melcoud will over ride any ...
By Abernyte , 1 day ago
-
Finding flow temp data from Samsung 16kw HP
Hello, I have a Samsung MIM-E03 16kwh heat pump, and ...
By martingale , 1 day ago
