Last seen: Mar 3, 2025
I’ve got 30kW of battery being installed next week so this could work well for me. currnetly kid off peak is 8p do more attractive. However I’m the...
@sand I found that if you use the app to set the timer, you can have unlimited(?) temperature changes. You can also change between WC/Auto Adapt/Flow ...
We're in the process of replacing all of ours. They are about 18 years old and whilst some are still ok, some aren't so we're going to do them all at ...
You want to avoid the thermostats doing anything and keeping as many radiators etc open. So set them as say 30c and then adjust the WC until it kee...
Also where did you get 48% efficiency? Mine was 275% on the coldest days
Fuel is expensive. Even with ASHP being the cheapest in all but the coldest temperatures, people just want cheaper and heating a single room is a chea...
Just to add, I’ve found my Ecodan excellent in this cold snap. It’s not faultered once and has kept us nice and warm. So if you can get the install...
@abefroman interesting you say your hot water seems to be on a lot. Do you have a secondary return? They are often specked for larger houses to ...
I guess the thinking is you don’t always have to run the most efficiently but instead the most cost effectively. Ie our cheap period starts at 21:...
I also have an Ecodan Zubadan you can access the curve in the same way but hold the round button for 5+ seconds (ie longer) to see the edit ico...
@editor they are based on the heat outputs shown. So the cost of gas and electric to produce 2498kWh of energy. Which shouldn’t really matter much wit...
Latest Posts
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
@andrewj yeah we recreated it. Engineer seemed to think...
By swwils , 2 minutes ago
-
A while back I had a Y strainer fitted on the external ...
By jeegnesh , 45 minutes ago
-
RE: Controlling Daikin Altherma via P1P2 and Home Assistant
So to clarify (and rephrase the problem into my own ter...
By Majordennisbloodnok , 2 hours ago
-
RE: Free Ecoheat Heat Pump Install
This is an interesting way of looking at it, and I can ...
By Mars , 3 hours ago
-
RE: Configuring third party dongle for Ecodan local control
That's a good spot and a valuable insight, @sheriff-fat...
By Majordennisbloodnok , 3 hours ago
-
RE: Are We Sleepwalking Into Another Race to the Bottom?
@majordennisbloodnok And did ‘Honey’ order it for you? ...
By Toodles , 3 hours ago
-
RE: Setback savings - fact or fiction?
@robs — thanks again for your detailed comments. Some r...
By cathodeRay , 16 hours ago
-
RE: A Smarter Smart Controller from Homely?
@papahuhu I hope you get a swift resolution. Regards, T...
By Toodles , 20 hours ago
-
RE: Poll for Time of Use, tariffs, technology
That’s fine by me too Major, I feel it is a sad reflect...
By Toodles , 22 hours ago
-
Bingo. Sometimes a judiciously placed size 10 bovver bo...
By Majordennisbloodnok , 22 hours ago
-
RE: Mitsubishi Ecodan 11.2kW heat pump with low COP
@ciocoiu-alexandru I can't provide the same level of di...
By Sheriff Fatman , 22 hours ago
-
The three technical issues I'm considering are: BMS...
By Transparent , 1 day ago
-
RE: LiFePO4 lithium battery fires and explosions
@transparent Your post may fit better in th...
By Batpred , 1 day ago
-
RE: British Gas vs Octopus Energy vs Heat Geek vs EDF vs Aira vs OVO vs EON.Next vs Boxt
@jamespawhite, if you could be bothered, you could also...
By Mars , 1 day ago
-
RE: Commencing on an ASHP Installation Process
I've got a bit of time to draft something today, so the...
By Sheriff Fatman , 2 days ago
-
RE: Help with heat pump sizing
@amin I dont think materially relative to t...
By JamesPa , 2 days ago
-
@majordennisbloodnok I have decided to take the plunge....
By TechnoGeek , 2 days ago
-
RE: Different dT on each radiator?
I cant sorry. Its based on some calculations I did fro...
By JamesPa , 3 days ago
