Activity
 
Notifications
Clear all
Amanda1
@amanda1
Member
Estimable Member
252 kWhs
Joined: Jun 4, 2023
Last seen: Nov 20, 2023
Topics: 1 / Replies: 52
Reply
RE: Freeze Stat/Defrost setting….Ecodan in freezing conditions

@linz I have the Freeze/stat function disabled on my Ecodan, with sufficient Glycol in the system, because otherwise the pump would be on all the time...

7 months ago
Reply
RE: Say hello and introduce yourself

@transparent I do keep a record of everything. On the several occasions when EPCs have been done on properties I have either sold or bought (or in t...

12 months ago
Reply
RE: Say hello and introduce yourself

@transparent An Inspector Called out of the blue (from the organisation overseeing the ABS EES scheme) yesterday to check the Cavity Wall Insulation r...

12 months ago
Reply
RE: Say hello and introduce yourself

@transparent Hi - A ‘fact based’ government website would be hardly likely to inspire trust on my part, but that’s because there are many possible per...

12 months ago
Reply
RE: Say hello and introduce yourself

@kev-m you said it! Backbreaking - I managed to get down to check the summary of settings and change the legionella settings but then I thought I was ...

12 months ago
Reply
RE: Say hello and introduce yourself

@transparent you see this is the problem for the installers’ victims…..comprehension - it all just looks like a load of pipes to me! Although, I was t...

12 months ago
Reply
RE: Say hello and introduce yourself

@transparent Everwarm were the installers of the ASHP and the Cavity Wall Insulation. They have massive contracts with Home Energy Scotland in partner...

12 months ago
Reply
RE: Say hello and introduce yourself

@transparent quick reply re: overflow - the overflow dates back to before my time (I have been here ten years but I think it us much older than that)....

12 months ago
Reply
RE: Say hello and introduce yourself

@transparent quick answer to one if the points in your labels: the brush strips are temporary plugs, the cavity wall insulation has yet to be put in (...

12 months ago
Reply
RE: Say hello and introduce yourself

@transparent Many many thanks for this. These are things I can do myself which is good. Here are some shots of the door and the pipes on the exterior ...

12 months ago
Reply
RE: Say hello and introduce yourself

@transparent these are the Melcloud reports for the last 24 hours re Flow Temp, Return Temp, and HW temp, and outside temp.

12 months ago
Reply
RE: Say hello and introduce yourself

@transparent the cupboard is located as shown in red. The house is not as wonky as in my diagram. .

12 months ago
Page 1 / 5
Share:

Join Us!

Latest Posts

Heat Pump Humour

x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
Shield Security