Last seen: Feb 12, 2025
Any advice on best times to set dhw schedule? Definitely will do this. No idea what this means. The ideal doesn't seem to be able to target ...
@uk_pete_2000 I cannot tell you how invaluable everyone's feedback is. It's currently cycling around 1-2 per hour so down to about 40 a day. I b...
Very interesting.....yes the thermistor was not pushed in fully and bent over so not quite picking up temp properly but only minor issue. Most inte...
@uk_pete_2000 any thoughts on the ideal halo air controller?
Yes it appears that way, ot was also a lot further out and have pushed in since speaking to ideal. Not sure, will be taking tape off today on video...
I thought that if there's no dt then there's no heat transfer going on?
@jamespa how else can I increase my delta t? When I reduce flow rate (condenser pump speed) the delta t increases to around 5c.
Is this on the ch pump? I've got a wilo pump and changing this pump speed from 3 to 1 doesn't change flow rate I don't believe...probably wrong though...
Yes it's a unvented cylinder and does the central heating and dhw. Apologies, the sensors are on the flow pipe coming in and return leaving the h...
@uk_pete_2000 yes it's a gledhill 300L + 72L internal buffer tank. Sadly can't access in out ports but flow and returns are normally 37-35 /46-43 etc...
This is a really fascinating discussion, it's great to see so many are navigating through this journey and noone seems to have a perfect solution just...
Latest Posts
-
The sad end of my ECO4 installation.
This afternoon I was advised by a charity that was help...
By Dwynwen , 1 hour ago
-
RE: Why do we need pressurised systems?
@iaack I enquired of Wattson and the reply was very muc...
By Toodles , 2 hours ago
-
@jamespa that is quite important. It would be good if t...
By Grantmethestrength , 3 hours ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 5 hours ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 5 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 9 hours ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 9 hours ago
-
RE: 300 Liter Tank - Do I have to heat it all?
I agree with @morgan. You can turn down the target t...
By JamesPa , 11 hours ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 1 day ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 2 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 2 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 2 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
I would deffo install an additional slinky run, especia...
By Transparent , 2 days ago
-
RE: Say hello and introduce yourself
@editor fab - thanks Mars, and keep up the great work o...
By normpang , 2 days ago
-
RE: Compressor and Evaporator Stratification
@trebor12345 So I think the 1st zigzag section shows so...
By ASHP-BOBBA , 3 days ago
-
RE: Is this just haze or something more?
@majordennisbloodnok I was giving a talk to primary sch...
By Toodles , 3 days ago
-
RE: Tesla Powerwall – More of a ‘Luxury’ Than an ROI Winner!
We had our Tesla Powerwall 3 (and Gateway) installed ea...
By Old_Scientist , 3 days ago
-
Indeed. With a battery its presumably the battery con...
By JamesPa , 3 days ago
-
RE: No-code, plug-and-play monitoring for your heat pump
To update an ESP device using ESPHome in Home Assistant...
By Grantmethestrength , 4 days ago
