Last seen: Feb 9, 2022
Hi jonathans It would be interesting to see how expanded works out for you if you try that. For me it did work well to stop a temperature oversho...
Adding up the running totals, it looks like I have 2.8 COP though part of that is with the higher heat curve and through the colder weather and I'd ex...
I should mention also my set point on the sensocomfort is 21 Deg and it usually holds around 22/21.5. A radiator valves fully open, running 24/7. Th...
6.2.3 Heating curve In heating installations with a heat pump, the heat curve for all heating circuits is 0.6. In all mixed heating circuits with bo...
Hi Jonathans, I had an Aerotherm Plus installed a few weeks ago, the heat curve was also set at 1.2. Check out the manual for your controller, I ex...
Hi HydroS, I agree, it could be the weather compensation is set too high. My Vaillant has been operational for a couple of weeks and it was far too...
We have just had an Vaillant Aerotherm Plus installed and approved RHI. It took from around July to now, December. I also needed planning as it is t...
- 26 Forums
- 2,255 Topics
- 50.3 K Posts
- 494 Online
- 5,918 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Are We Sleepwalking Into Another Race to the Bottom?
Thanks, @jamespa. Of course, it’s irrelevant unless Hea...
By Majordennisbloodnok , 46 minutes ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
2025 - now a record year of Solar PV Generation. Octobe...
By AllyFish , 48 minutes ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
All good then, installer has no excuses. Re the eskim...
By JamesPa , 57 minutes ago
-
RE: Midea ASHP – how to set weather compensation
@pash44pump - AI may have its uses (and I sort of allow...
By cathodeRay , 2 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
If you have HA up and running watching the flow temp or...
By JamesPa , 2 hours ago
-
RE: Mitsubishi Ecodan R290 10kW performance
Totally agree that any system is reliant on the ability...
By Sheriff Fatman , 2 hours ago
-
British Gas Heat Pump Installation Complaint
In 2024, my wife and I thought that we would try to do ...
By BGNO , 4 hours ago
-
Erm... no we can't! The issue first raised by the OP ...
By Transparent , 4 hours ago
-
RE: My experience with 3 heat pump surveys: Heat Geek, British Gas & Octopus
@grahamf good set of questions. Can I suggest just one...
By JamesPa , 4 hours ago
-
RE: Is it mad to think there should be a minimum SCOP for UK heat pump installs?
This wouldn't solve the problem @mars is trying to solv...
By JamesPa , 5 hours ago
-
RE: Who has a V2G EV installation
I have PV, ASHP, UFH, Battery storage and no Gas (yaay ...
By AgentGeorge , 6 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
Thx, but Sven did the hardware development. My role (as...
By Mosibi , 16 hours ago
-
RE: PV Panels on roof in Conservation Area
@majordennisbloodnok Fnaargh, I was thinking about try...
By colinc , 18 hours ago
-
RE: Electricity price predictions
@jamespa Ah, you mean MPs that have not pro...
By Batpred , 19 hours ago
-
RE: Buying large amp bidirectional RCD and RCBO
Exactly @transparent , this type of RCBOs are not easil...
By Batpred , 19 hours ago
-
RE: Very Much Awake – Renewing the Heating Industry One Step at a Time
I feel that that attitude shared by Aadil from Heat Gee...
By Toodles , 23 hours ago
-
RE: The Hidden Secret to a Successful Heat Pump: Pipe Size Matters
and we have some of the strongest tidal flows anywhere ...
By Old_Scientist , 1 day ago
-
RE: Radiator Sizing Dilemma: Vertical vs Type 33 for Low-Temperature Heat Pump Systems
This looks OK. Overall you have roughly the right amoun...
By Old_Scientist , 1 day ago
-
RE: How can I programme a setback for my Samsung Gen6 8kW heat pump?
I'm not familiar with Hive thermostats/controllers, but...
By Old_Scientist , 1 day ago

