Forums

Forums
Renewable Heating
Introductions, Foru...
Say hello and intro...
 
Notifications
Clear all

[Sticky] Say hello and introduce yourself

 
Page 92 / 103
Introductions, Forum Rules & Updates
Last Post by Transparent 1 month ago
1,234 Posts
254 Users
712 Reactions
221 K Views
RSS
 Cathyem1
(@cathyem1)
Estimable Member Member
Joined: 7 months ago
Posts: 59
07/02/2025 9:57 am  

Posted by: @editor
↑

If you're new to the forums, we'd like to take this opportunity to welcome you. Please introduce yourself by telling us a bit about yourself and where you're based.

Hi, I’m Cathy and I’m in Essex. I’ve just had an air source heat pump installed this week and it’s all new to me. Currently my house is cold and my smart meter is rising as I watch! I have a Baxi heat pump and a Honeywell Home thermostat.

 



   
ReplyQuote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3443
Topic starter 07/02/2025 10:32 am  

@cathyem1 welcome to the forums and sorry to hear that your ASHP is not running as it should. Can you please start a new forum dedicated to your system and tell us more about your system and set up?


Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
👍
1
ReplyQuote
Transparent
 Transparent
(@transparent)
Illustrious Member Moderator
Joined: 4 years ago
Posts: 2482
07/02/2025 11:28 am  

Posted by: @cathyem1
↑

my smart meter is rising as I watch!

Levitating Smart Meters are to be discouraged @cathyem1  😮 

I'll have a look at your new topic and see if we can help with that.


Save energy... recycle electrons!


   
😂
1
ReplyQuote
 Silverkop
(@silverkop)
New Member Member
Joined: 7 months ago
Posts: 2
07/02/2025 3:12 pm  

Hi looking to get ASHP this year been my goal since getting solar and batteries and just got go ahead from the boss before christmas.



   
ReplyQuote
 MaxtheDog
(@maxthedog)
Active Member Member
Joined: 7 months ago
Posts: 7
22/02/2025 1:58 pm  

Hello All,

New member here, just begun looking at a ASHP for our house. We’ve already got Solar panels, as of last March and they’ve definitely made a difference to our electricity usage.

I’m a retired BMS (Building Management Systems) engineer, formally employed by Schneider Electric, Satchwell and prior to that served my time as an electrician.

While I was working I never encountered a ASHP or even GSHP, it was always dual fuel boilers and conventional chillers so they are very much a black box as it were. 
I’ll do plenty of reading, YT watching and no doubt be back with various questions.

Regardd,

Michael.


ASHP. It’s all to do with Specific Enthalpy.


   
👍
1
ReplyQuote
Transparent
 Transparent
(@transparent)
Illustrious Member Moderator
Joined: 4 years ago
Posts: 2482
22/02/2025 3:16 pm  

Hi @maxthedog

That's a useful skill-set to bring to this forum.

Irrespective of the questions you might have, please feel free to dive straight into existing topics...
... especially where there are issues regarding building fabric and electrics.

We are going to be facing ever more respondents here who really ought to be moving to a 3ph domestic supply,
but haven't appreciated the need to do so.
Have a look at my comments here, for example.

Does your previous work with Schneider mean that you're in the Telford area, with NGED as your DNO?


Save energy... recycle electrons!


   
ReplyQuote



Toodles
 Toodles
(@toodles)
Illustrious Member Contributor
Joined: 3 years ago
Posts: 2096
22/02/2025 3:19 pm  

@maxthedog Welcome to the RHH, your experience and expertise will be very useful hereabouts I’m sure. We are a friendly group and no question is too trivial and rabbit holes are mined by quite a few members! Regards, Toodles.


Toodles, he heats his home with cold draughts and cooks his food with magnets.


   
ReplyQuote
 MaxtheDog
(@maxthedog)
Active Member Member
Joined: 7 months ago
Posts: 7
22/02/2025 4:19 pm  

Hi,

Thanks for the welcome Transparent, Toodles.

Spent my time in controls in their Yorkshire regions with the odd foray over ‘t Pennines, but nothing south of Sheffield.

I’ll get some calculations done and take a look at our Octopus numbers, then see what questions to ask.

Cheers,

M


ASHP. It’s all to do with Specific Enthalpy.


   
👍
2
ReplyQuote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3443
Topic starter 22/02/2025 10:36 pm  

@maxthedog welcome to the forums. When you’re ready, please start a dedicated topic for your project.


Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
 AdamK
(@adamk)
Reputable Member Member
Joined: 7 months ago
Posts: 107
23/02/2025 1:30 am  

Adam, based in Boston Lincs. been watching lots of the Heat Geek stuff but still not getting the feeling of confidence even from some HG affiliated companies.



   
👍
1
ReplyQuote
Transparent
 Transparent
(@transparent)
Illustrious Member Moderator
Joined: 4 years ago
Posts: 2482
23/02/2025 12:04 pm  

Hi @adamk - We're pleased to have you here.

Are you contemplating a heat-pump installation?
Or do you already have one which isn't performing as you'd hoped?

Many of us gain confidence here by the very act of responding to posts from others.
It's the discussion itself which helps to shape our ideas, and gives insight into the underlying concepts.


Save energy... recycle electrons!


   
ReplyQuote
 John Castle
(@john-castle)
Active Member Member
Joined: 7 months ago
Posts: 6
23/02/2025 2:06 pm  

Hi all John based in Winchester, Hampshire. I’ve had solar on my roof for about 12 years now, 2 years ago added batteries and just over a year ago a heat pump! Have been struggling a bit with the heat pump journey ( poor installer plus refrigerant leak) but now hopefully in a position to fine tune.

 



   
ReplyQuote



Page 92 / 103
Forum Jump:
  Previous Topic
Next Topic  



Share:

Join Us!

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →